Controller can be used for heat application or pump controller with external clip- and bulb sensor with backup memory function
Specification
Active (visual): Green LED lights up.
Supply Voltage: 230Vac (+10% / -15%) 50/60Hz.
Relay Contact Voltage: 230 Vac 50/60 Hz.
Relay Contact Current: 16A Max. (resistive).
Sensing Element: MFP-7 and bulb.
Temperature Accuracy: +/- 0.5 °C (+/- 1 °F).
Operating Temperature: -5 – 55 °C.
Storage Temperature: -5 ~ 60 °C.
Operating Humidity: 5-95%RH non-condensing.
The Controller can be used for several applications in the mode HEAT, like a: terracontroller, heatingmats, air control etc . In this mode normally the bulb sensor is beeing used.
To use the bulb sensor as a roomsensor just roll the cable up and place it behind the controller.
The Controller can save energy when using it as a pumpswitch. The pump turns on when the desired temperature is reached (normally the pump always running, 24hours a day!). Every 24 hour the pump turns on for at least 30 seconds.
plug-in thermostat,