waterproof 24v 150w led power supply 1.Power factor compensation 2.Working temperature:-30-+50 degrees 3.CE&ROHS waterproof power supply 1.Wide range of output power to maintain high fficiency.2.All series are equipped with power factor compensation,high efficiency and energy saving.3.Maintain constant high conversion efficiency even the load changes.("CCE"for short)4.Automatic clamping circuit protection,a special protective function,never overvoltage.5.Suitable for all-weather,working temperature range:-40 degrees +50 degrees.6.Protection:short circuit,over current,over load,over temperature.7.Waterproof grade:IP67 8.Other functions can beFEATURE:
| Model Number | ELF-24150-OD | |
| Output | Rated Current | 6.25A |
| Constant voltage | 24v | |
| Output power | 150w | |
| Ripple&Roise(MAX) | ≤300MVP-P | |
| Line Regulation | ±2percent | |
| Load Regulation | ±3percent | |
| Setup Time | 8ms | |
| Input | Voltage Range | 170-250V |
| Frequency Range | 43-65Hz | |
| Transfer Efficiency | 90 percentage | |
| Protection | Over current | Protection type:Output limited power |
| Short current | Protection type:According to the circuit type: hiccup mode, or zero-euro shortcircuit, input power limit ≤ 5W. | |
| Over voltage | Protection type:Automatic clamp circuit, there is special protection,If there isno special protection, is in the maximum power limit. | |
| Over temperature | temperature control protection(85°C±5°C) | |
| Automatic recovery below 65°C | ||
| Environment | Working temperature | -30~50°C |
| Operation temp | Waterproof grade:IP67 | |
| Stage temp and humidity | -40~+80°C | |
| Safety%EMC | Safety stadards | VL EN61347-1 EN61347-2-13 |
| Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC (VL VDE standard) | |
| Insulation resistance | I/P-O/P:I/P-FG,O/P-FG:100M Ohms/500VDC/25°C/70%RH | |
| EMI | EN55015 EN55022(CISPR22) Class B | |
| Harmonic current | EN61000-3-2 Class C(≥50% load);EN61000-3-3 | |
| Others | MTBF | ≥15000h(environmental temp is 40°C) |
| Dimension(MM) | 160×71×39 200×75×45 240×75×45(The length is includinginstallation dimensions.) | |
| Packing | ||
| Notes | 1.All parameters not specially mentioned are measured at 230VAC input,rated load and ambienttemperature. | |
| 2.Safety&EMC design references:EN60598-1,subject 8750(uL) | ||
| 3.Output rated voltage for constant current stystem .This is suitable for many LED equipments,but please reconfirm if it is suitable for some special electrical system before using. | ||
| 4.Power is considered as the last part of the devices . Therefore, the power of EMC performancewill be affected by the appliances,the final equipment manufacturers must regain the qualification after installation. | ||
waterproof 24v 150w led power supply
