DR series 45w guide rail switching power supply
can be installed on DIN rail: TS-35/7.5or TS-35/15
| Guide rail type switching power supply 45W | |||||||||
|
| DR-45W | ||||
| Model | DR-45-5 | DR-45-12 | DR-45-24 | |
| Output | DC voltage | 5V | 12V | 24V |
| Voltage tolerance | ±2% | ±1% | ±1% | |
| Rated current | 5A | 3.5A | 2A | |
| Current range | 0~5A | 0~3.5A | 0~2A | |
| Rated power | 25W | 42W | 48W | |
| Ripple&noise | 80mvp-p | 100mvp-p | 150mvp-p | |
| DCvoltage ADJ.range | -9%~+10% | ±10% | ±10% | |
| Input | Voltage range | 90~264VAC,127~373VDC | ||
| Frequency | 47~63Hz | |||
| AC current | 1.0A/110VAC, 0.55A/220VAC | |||
| Efficiency | 75% | 81% | 83% | |
| Inrush current | Cold start current 20A/115VAC, 40A/230VAC | |||
| Leakage current | < 1mA/240VAC | |||
| Protection | Over load | above 105%~150% rated power | ||
| protection type: hiccup mode, auto-recovery after fault condition is removed | ||||
| Over voltage | 6.8~8.2V | 15.6~17.8V | 30.6~33.2V | |
| protection type:cut off output voltage,diode clamp | ||||
| Environment | Working temp,humidity | -20°C~+60°C, 20%~90%RH | ||
| Storagetemp,humidity | -40°C~+85°C,10%~95%RH non-condensing | |||
| Withstand vibration | 10~500Hz, 2G 10min/1cycle, period for 60 minutes, each axes | |||
| Safety | Withstand voltage | I/P-O/P: 3KVAC I/P-FG:1.5KVAC O/P-FG: 0.5KVAC | ||
| Isolated resistance | I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC | |||
| Fitstandard | Safety standard | Fit UL1012 | ||
| EMC standard | meet EN55022,CLASS A | |||
| Others | Dimension | 78*93*56mm (L*W*H) | ||
DR series 45w guide rail switching power supply
