1.Input:110V/220V or 100-240 VAC 2.Frequency:50-60Hz 3.Output: 12V 4.Approvals:CE,UL 5.100% full load burn-in test
| model/specification | SP-500-12 | SP-500-13.5 | SP-500-15 | SP-500-24 | SP-500W-27 | SP-500-48 |
| DC output voltage(V) | 12 | 13.5 | 15 | 24 | 27 | 48 |
Output voltage error | ±1% | ±1% | ±1% | ±1% | ±1% | ±1% |
| Rated output current(A) | 40 | 36 | 32 | 20 | 18 | 10 |
| Output current range(A) | 0-40 | 0-36 | 0-32 | 0-20 | 0-18 | 0-10 |
| Wave & Noise | 240mVp-p | 240mVp-p | 240mVp-p | 240mVp-p | 200mVp-p | 300mVp-p |
| Inlet stability | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stability(Note5) | ±1% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| DC output power(W) | 480 | 486 | 480 | 480 | 486 | 480 |
| Efficiency | 84% | 84 % | 83% | 85.5% | 86.5% | 87% |
Adjustable range for DC voltage(V) | 10-13.2 | 12-15 | 13.5-18 | 20-26.4 | 24-30 | 41-56 |
AC input voltage range | 88-132VAC/176-264VAC, BY SWITCH, 47-63Hz,124-370VDC | |||||
AC input current(A) | 7A/115V, 3.5A/230V | |||||
Power factor | 0.95/100 ,240VAC | |||||
AC impulse current | 18A/115V, 36A/230V | |||||
Leakage current | <3.5mA/240VAC | |||||
Overload protection | 105%~135% TypePULSING HICCUP SHUTDOWN Reset: auto recovery | |||||
Over-voltage protection | ||||||
Fan control,O.T.P temp.coefficient | RTH1 OR RTH2>=50 FAN ON,<=45 FAN OFF,>=70 Cut off output ±0.03%(050) | |||||
Setup,rise,hold up time | 1.5s,50ms,20ms | |||||
Vibration | 10500Hz,2G 10min./1cycle,Period for 60min,EACH AXES | |||||
Withstand voltage | Input and output interval3KVAC,Input and enclosure1.5KVAC Output and enclosure0.5KVAC | |||||
Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure500VDC/100M Ohms | |||||
Working temp. & humidity | -10+50,20%90%RH | |||||
Store temp.& humidity | -20+85,10%95%%RH | |||||
Overall dimension | 180*120*95mm | |||||
Weight | 1.8Kgs | |||||
Safety standard | UL1950,TUV EN60950 | |||||
EMS standard | IEC1000-42,3,4,5,6,8,11 IEC100-3-2 | |||||
Note:
1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note:5)3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test: The load is from 0% to 100%,others 60%.6.C2311must be knocked down.
500W switching 12v 40a power supply UL approved
