5V/12V24V/25W switch mode power supply,CE,ROHS approved
5V/12V24V/25W switch mode power supply 1. CE,ROHS approved 2. Short lead time 5V/12V24V/25W switch mode power supply,CE,ROHS approved
CE, Rohs approved
size: 99*97*35mm
| ModelSpecification | S-25-5 | S-25-12 | S-25-15 | S-25-24 |
| DC output voltage | 5V | 12V | 15V | 24V |
| Output voltage error(Note2) | ±2% | ±1% | ±1% | ±1% |
| Rated output current | 5A | 2.1A | 1.7A | 1.1A |
| Output current rage | 0-5A | 0-2.1A | 0-1.7A | 0-1.1A |
| Wave and noise(Note3) | 50mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
| Inlet stability(Note4) | ±0.5% | ±0.5% | ±0.5% | ±0.5% |
| Load stablity (Note5) | ±1% | ±0.5% | ±0.5% | ±0.5% |
| DC output power | 25W | 25.2W | 25.5W | 26.4W |
| Efficiency | 72%/115VAC | 76%/115VAC | 77%/115VAC | 80%/115VAC |
| Adjustable range for DC voltage | +10,-5% | +10% | +10% | +10% |
| AC input voltage range | 85~132VAC/180-264VAC selected by switch 47-63Hz;120~370VDC | |||
| Input current | 0.6A/115V 0.35A/230A | |||
| AC INnrush current | Cold-start current15A/115V 30A/230V | |||
| Leakage current | <0.75mA/240VAC | |||
| Overload proctection | 105%-150%Type:Foldback:current limiting reset:auto recovery | |||
| Over-voltage protection | 105%-135 | |||
| High-temperature protection | ||||
| Temperature coefficient | ±0.03%/°C(0-50°C) | |||
| Setup rise hold up time | 800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC | |||
| Vibration | 10-500Hz,2G 10min,/1cycle,Period for60min,Each axes | |||
| Withstand voltage | Input and output internal,1.5KVAC,Input and enclosure,1.5KVAC,Output and enclosure,0.5KVAC | |||
| Isolation resistance | Input and output internal:Input and enclosure,Output and enclosure,500VDC/100MΩ | |||
| Working temperature and humidity | -10°C~+60°C(Refer to output derating curve),20%~90%RH | |||
| Store temperature and humidity | -20°C~+85°C.10%~95%RH | |||
| Overall dimension | 99×97×35mm | |||
| Weight | 0.3Kgs | |||
| Safety standards | UL1012 TUV EN6050(IEC950,UL1950)Approved | |||
| EMC standards | CISPR22(EN55022),IEC801-2,3,4,IEC555-2 Verification | |||
| Note1.The testing condition for the paramenter above is :230VAC input,rated load,25°C70% RH.Humidity.2.Error.include the setting error,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%. | ||||
5V/12V24V/25W switch mode power supply,CE,ROHS approved
