Switching power supply 1.AC input range selected by switch 2.100% full load burn-in 3.Low cost 4.120 single output
120W Single Output Switching Power Supply,DC 12V/24V Power Supply
Features:
1.AC input range selected by switch2.Protections:Short circuit/Over load3.Cooling by free air convection4.EMI filter inside, low noise desigh5.100% full load burn-in6.Lost cost7.High reliability8.1 year warranty
Specification
MODEL | S-120-12 | S-120-24 | |
OUTPUT | 12VDC/10A | 24VDC/5A | |
DIMENSION | 199*98*42mm (L*W*H) | ||
OURPUT VOLTAGE ADJ. RANGE | ±10% | ||
INPUT VOLTAGE RANGE | 85~264VAC | ||
FREQUENCY RANGE | 47~63Hz | ||
EFFICIENCY(Typ.) | 78% | 78% | |
VOLTAGE TOLERANCE | ±3% | ±3% | |
INRUSH CURRENT(max) | 40A@120VAC, | ||
OVER LOAD PROTECTION | 105%~200%( rated power),self-recover | ||
OVER VOLTAGE PROTECTION | 115%~135%(rated voltage) | ||
SHORT CIRCUIT PROTECTION | self-recovery | ||
SETUP TIME | ≤ 2S@120VAC ≤1.0S@230VAC | ||
HOLD TIME | ≥10mS@120VAC, ≥20mS@230VAC | ||
ISOLATION VOLTAGE | I/P-O/P:AC1500V,1min | ||
RIPPLE & NOISE (max.) | ≤120mV | ≤240mV | |
WORKING TEMP. | -10°C~50°C;20%~90%RH (no condensation) | ||
EMI CONDUCTION & RADIATION | Design refer EN/UL60950,EN55022 Class B;EN61000-4-2/-3/-4/-5/-6/-11 | ||
120W Single Output Switching Power Supply,DC 12V/24V Power Supply
