Detailed Product Description
100W switch power supply --+5VDC/12A,+24VDC/1.2A,+5VDC/2A
1. COST EFFECTIVENESS
2. BULIT-IN INPUT SURGE CURRENT PROTECTION CIRCUITS
3. OVERVOLTAGE, OVERLOAD PROTECTION
4. SHORT CIRCUIT PROTECTION
5. 100% FULL LOAD BURN IN TEST
6. HIGH EFFICIENCY LOW WORKING TEMPERATURE
7. APPLICATIONARM NAVAL SHIPS
SPECIFICATION ALL specification are typical at normal input,full load at 25 unless otherwise stated
INPUT | INPUT VOLTAGE | AC170~V264V |
FREQUENCY | 50~60Hz | |
INRUSH CURRENT | 30A/230V,Cold Start | |
LEAKAGE CURRENT | <0.5mA/230VAC | |
OUTPUT | LINE REGULATION | ±5% max |
RIPPLE&NOISE<mVP-P>1 | <1% of output voltage | |
TEMPERATURE COEFFICIENT | ±0.02%/ | |
OUTPUT VOLTAGE | ±10% | |
START-UP TIME | ≤1S(ACIN230V,Io=100%) | |
HOLD-UP TIME | ≥20mS(ACIN230V,Io=100%) | |
PROTECTION FUNCTION | OVER LOAD PROTECTION | 105%--150% of Rating,automatic recovery |
OVER VOLTAGE PROTECTION | 115%--135% of Rating(V1) | |
ISOLATION | INPUT--OUTPUT | AC1500V,1minute |
INPUT--FG | AC1500V,1minute | |
OUTPUT--FG | AC500V,1minute | |
ISOLATION RESISTANCE | INPUT--OUTPUT | ≥50MΩ,500VDC |
INPUT--FG | ≥50MΩ,500VDC | |
OUTPUT--FG | ≥50MΩ,500VDC | |
ENVIRONMENT | OPERATION TEMPERATURE | 0--45,20%--90%RH(Non Condensing) |
STORAGE TEMPERATURE | -20--85,10%--95%RH(Non Condensing) | |
ALTITUDE | <2000m | |
STRUCTURE | COOLING | Natural convection cooling |
DIMENSIONS | 160×98×40mm or 160×98×42mm |
1 Figure is peak-to-peak .Output ripple is measured by using 20M oscilloscope
OUTPUT FEATURE
OUTPUT VOLTAGE | OUTPUT CURRENT | OUTPUT WATTAGE | EFFICIENCY | TOTAL REGULATION | MODEL NUMBER |
+5V | 12A | 60W | 72% | ±1% | SW100-3AAC |
+24V | 1 .2A | 29W | 74% | ±2% | |
+5V | 2A | 10W | 72% | ±2% |
