Detailed Product Description
12Vdc/8A switching mode power supply
1. COST EFFECTIVENESS
2. LOW RIPPLE NOISE.
3. OVERVOLTAGE, OVERLOAD PROTECTION
4. SHORT CIRCUIT PROTECTION WITH SHUT-DOWN
5. 100% FULL LOAD BURN IN TEST.
6. HIGH EFFICIENCY LOW WORKING TEMPERATURE
7. APPLICATION:BOAT EQUIPMENT
SPECIFICATION ALL specification are typical at normal input,full load at 25 unless otherwise stated
INPUT | INPUT VOLTAGE | DC22V-26V |
FREQUENCY | 47-63Hz | |
INRUSH CURRENT | 30A/230V,Cold Start | |
LEAKAGE CURRENT | <0.5mA/230VAC | |
OUTPUT | LINE REGULATION | ±5% max |
RIPPLE&NOISE<mVP-P>1 | <1% of output voltage | |
TEMPERATURE COEFFICIENT | ±0.02%/ | |
OUTPUT VOLTAGE | ±10% | |
START-UP TIME | ≤1S(ACIN230V,Io=100%) | |
HOLD-UP TIME | ≥20mS(ACIN230V,Io=100%) | |
PROTECTION FUNCTION | OVER LOAD PROTECTION | 105%~150% of Rating,automatic recovery |
OVER VOLTAGE PROTECTION | 115%~135% of Rating(V1) | |
ISOLATION | INPUT~OUTPUT | AC1500V,1minute |
INPUT~FG | AC1500V,1minute | |
OUTPUT~FG | AC500V,1minute | |
ISOLATION RESISTANCE | INPUT~OUTPUT | ≥50MΩ,500VDC |
INPUT~FG | ≥50MΩ,500VDC | |
OUTPUT~FG | ≥50MΩ,500VDC | |
ENVIRONMENT | OPERATION TEMPERATURE | 0~45,20%~90%RH(Non Condensing) |
STORAGE TEMPERATURE | -20~85,10%~95%RH(Non Condensing) | |
ALTITUDE | <2000m | |
STRUCTURE | COOLING | Natural convection cooling |
DIMENSIONS | 160×98×42mm |
1 Figure is peak-to-peak .Output ripple is measured by using 20M oscilloscope
OUTPUT FEATURE
OUTPUT VOLTAGE | OUTPUT CURRENT | OUTPUT WATTAGE | EFFICIENCY | TOTAL REGULATION2 | MODEL NUMBER |
+8V | 12A | 96W | 78% | ±% | SW90-1ADC |
