1.seat height can lift 2.5-point seat belt structure 3.aluminum structure 4.slip suspension designs...
Quick Details
Type: Baby storller Material: Cotton
Place of Origin: Henan China(Mainland) Frame Material: Aluminum Aiioy
Packaging & Delivery
Packaging Detail: Carton packaging
Delivery Detail: within 35 days
Specifications
(1) installation of fabricTo find out the longest and the handle with a portable stroller from the back through the hole. Handle with the lock pin into the end of the ring. Baby will latch onto the bottom of slot cars, and connecting the handle with the stroller. Find the shortest with the handle from the stroller through the front of the hole. Handle with the lock pin into the end of the ring. Baby will latch onto the bottom of slot cars, and connecting the handle with the stroller. On the other side of the stroller handle with a repeat the operation. So both sides are installed with the handle, you can a fixed lining. Rear corner of the baby carriages from the beginning. Opening lined with baby car edges.The baby car upside down, following the edge of the hole with the hook / hanging tooth alignment, connection lining. A total of six hooks on each side of the three.Finally, the pad into the stroller.
(2) to the portable car baby bottle installed windPeng plastic hooks to wind aligned on each side of the bag, then push. Along the zipper pull, connecting wind Peng and baby strollers. Connecting the side buttons.
(3) Remove the wind from the seat PengUnlock the buttons on both sides of wind Peng. Unzip and remove the wind Peng. Press the two seats inside the cock, so that the plastic hooks from the seat.
(4) with both hands, thumb pressing.
Portable locking device assembly of baby carriagesFirst, the handle to the highest position. As shown, the V-parts around the center pole around. The control rod into the hole. Attention! Large locking pin into the big hole, a small lock pin into the hole. Upward direction toward the center pole to push the lever in (K), the locking device and the central rod fixed.
(5) the assembly of portable strollerBaby carriages along the rails will push down until you hear both sides of the issue of "clicks" soon. Check the baby car is properly installed in the arm. Strain on both sides of the light is green. Then, baby carriages must be locked in place around the center pole. Pulled down the lever (K), can release the locking device. Slide the locking device, so that the front hook stroller. The direction toward the center pole to flip the lever in (K) can be locked.
(6) the demolition of portable strollerPulled down the lever (K), can release the locking device. Click on the back of locking device, so that with the baby carriages from the locking device. Slide the locking device to the handle, and then in the direction towards the central rod to turn the lever in (K) fixed. Push baby carriages on each side of the handle (L), mentioned it, and then lift the stroller.
(7) the use of baby carriagesWith both sides of the handle with a movable carry baby strollers. The handle when not in use can be placed with baby carriages inside pocket. Strollers can be placed on the floor, can withstand shaking. This product is equipped with seat belt D-ring connection
(8) KitThere are two practical stroller storage bags, is incorporated bottles, dolls and even appliances ideal for mobile phones.
(9) coverCover placed on the Portable Baby lathe. Connected with the side of the button cover. Will cover the elastic band connected with the wind up inside bottle.
(10) rain coverSets to pull off the rain and wind bottle of baby carriages. Wrapped tightly with Velcro secure the middle bar.
(11) netsNets pulled the handle. Peng nets pulled the wind the main stem. Ensure that the nets around the main bar. Fixed nets with the buttons. One on each side. Mosquito nets over baby carriages will be pulled to cover the entire bag. One way or another the middle pole of the zipper, and one each on each side. Remove the cloth cover off his front lining. From the edge of the hook / off his teeth on the inner lining. Three on each side. Wash package will hook connected to the connecting ring.
Please read before using these instructions, and retain for future reference. According to the instructions if the child's safety may be affected.
High Quality and fashion Baby Stroller
