1.60W LED solar street lamp 2.Make goods based on your requirements 3.Power: 120w Solar Panel 4.Power Supply: Solar
Solar street light
Quick Details:
Place of Origin | Jiangsu, China (Mainland) |
Brand Name | LEADER |
Model Number | YD2109 |
Charging Time (h) | 8 |
Usage | Street |
Solar Cell Type | Lead-acid battery |
LED lights: | 60W |
Solar panel: | 120W |
Storage battery: | 120AH |
Controller: | 12V/5A, 24V/10A(options) |
Pole: | 8-10M |
Daily running hours | 80hrs, 10hrs, 12hrs(options) |
material of pole: | plastic coated on hot-dip galvanized steel pole |
batttery: | maintenance free,fully-sealed laed acid storage battery |
lighting hours: | 6-8hours pre day |
IP code: | IP65 |
Port: | Shanghai |
Packaging Details: | CARTON OR WOONDEN |
Delivery Time: | IN A MONTH |
Payment Terms: | L/C,T/T,Western Union |
Supply Ability: | 500 Set/Sets per Month |
Height of pole: 3-12M
Applicable light source: Hi-power LED
Solar panel: Hi-efficient mono-crystalline/poly-crystalline
Control system: automatically controlled by microcomputer, over-charging and over-discharging protection.
Battery: maintenance free, fully-sealed lead acid storage battery
Lighting hours: 6-8hours per day or more, 3-5 backup rainy days when the battery is fully charged
Material of the pole: plastic coated on hot-dip galvanized steel pole
The design, configuration and manufacture can meet customer’s requirements
| Comparision between LED road lamps and traditional high-sodium road lamps | ||||||||
| Item | High-power LED lamps | High-pressure sodium lamps | Remarks | |||||
| Features of light source | Lighting of solid form | Lighting by electric discharge of gas | The solid form withstands impact and cannot be easily broken | |||||
| Lminous Flux | Hight | High | As tigh-pressure sodium lamp has a very wide light spectrum, it is stronger than LED in terms of illumination. But,it is inferior to LED in the actual lighting effect.The reason is becausemany of the light in the spectrum cannot serve as lighting,e.g.uv,infrare,yellow light,etc. | |||||
| Index display | Excellent | Poor | ||||||
| Efficiency of lamp | High | Low | Comparing with the road lamps of tradition light sources,it can save over60% | |||||
| Light mixture | Excellent | Poor | Comparing with the road lamps of tradition light sources,LED can ensure accurate light mixture | |||||
| Life span | 50000 hours | 10000hours | LED is longer in life span.The design life span of the high-pressure sodium lamps is 20000 hours.Due to the impact of voltage change and the strong current for start, the acyual service life is below two years. | |||||
| Environment protection | No pollution | Pollution of Hg and Pb | LED light source does not contain UV light, and is free from any hazardous substance | |||||
| Power feature | Steady power | Variable power | The variable power will not only laed to the increase of power consuption,but also seriously shorten the service life | |||||
| Star-up voltage | 85-265V | More than 198V | LED light source can be started with a wide range of voltage. | |||||
| Electrical satety | Safe voltage of 50V | High voltage | High safety | |||||
Installation
1. Climate condition
Install the PV panel in the following conditions:
Ambient temperature:-20c-+40c
Operating temperature:-20c-+80c
Snow load capacity: below 2000pa
Water resistance: don’t install the PV panel in a location where it would be immersed in water or continually exposed to water from sprinkler or fountain, etc
Corrosion resistance: except for corrosive salt area and sulfurous area
2. Orientation
Install the PV panels facing south (in Northern Hemisphere) or to north (in southern Hemisphere). Incorrect orientation will result in loss of power output.
PV panels connected in series should be installed at same orientation and angle. Different orientation or angle may cause loss of output power due to the different radiation on the panels.
Install the PV panels as free as possible from shading. Shading causes loss of output, even though the bypass diodes fitted in PV panels by manufactory can minimize such loss
3. Mounting and Notes:
Fasten the PV panels to the shelves with spring washers and flat washers.
Put the PV panels in a proper grounding way, which should be according to the mounting structures and environment.
Note: Do not stall the PV panels near naked flame or flammable materials
Mounting structure should withstand environment. Select proper material and corrosive treatment
Use appropriate methods to mount PV panels. Avoid any damages from falling
Do not disassemble, bend, walk on the panel please do not impact the panels by sharp objects
4. Caution
The PV panel has a pair of waterproof connectors (positive and negative). For the connection in series, please connect the positive (+) connector of 1st PV panel to the negative (-) connector of the next panel
Connect the output cables with load equipments correctly.
Solar street light YD2109
