Welcome to ECBAY
price mild steel plate A36 SS400 Q235B S235JR S355JR
price mild steel plate A36 SS400 Q235B S235JR S355JR

price mild steel plate 1.Q390,Q345, A709GR.50, S275JR, SM490A, St44-3, St52 2.Length:3000-18800mm 3.Width:1500-4020mm   price mild steel plate A36 SS400 Q235B S235JR S355JR

 Material:

  Carbon Steel flat Bar S45C/forged flat bar 

 Process:

  EAF + LF + VD + Forged + Heat Treatment (optional)

 Diameter:

  100mm-1200mm 

 Length:

  3000mm-12000mm   Straightness: 3mm/M max

 Heat treatment:

  Normalized / Annealed / Quenched / tempered

 Delivery condition:

  Hot forged +Rough machined (black surface after Q/T)+ Turned (optional)

 Technical Data:

 According to the customer's requirement of Chemical Composition, Physical  Properties and Mechanical Testing 

 Test:

 Ultrasonic test according to SEP 1921-84 G3 C/c

 Delivery time:

  60 days after advanced payment

 Payment:

 30% advance by T\T; Balance pay before the shipment against shipping documents  or irrevocable LC at sight

Chemical composition (%)

Grade

C

Si

Mn

P≤

S≤

S45C

0.43-0.50

0.15-0.35

0.60-0.90

0.030

0.050

Carbon Tool Steel

Steel is considered to be carbon tool steelwhen no minimum content is specified or required for chromium, cobalt, columbium, molybdenum, nickel, titanium, tungsten, vanadium or zirconium, or any other element to be added to obtain a desired alloying effect; when the specified minimum for copper does not exceed 0.40 per cent; or when the maximum content specified for any of the following elements does not exceed the percentages noted: manganese 1.65, silicon 0.60, copper 0.60. Carbon tool steels are normally classified as shown below.

Low-carbon steels contain up to 0.30 weight percent C. The largest category of this class of carbon tool steel is flat-rolled products (sheet or strip) usually in the cold-rolled and annealed condition. The carbon content for these high-formability steels is very low, less than 0.10 weight percent C, with up to 0.4 weight percent Mn. For rolled steel structural plates and sections, the carbon content may be increased to approximately 0.30 weight percent, with higher manganese up to 1.5 weight percent.

Medium-carbon steels are similar to low-carbon steels except that the carbon ranges from 0.30 to 0.60 weight percent and the manganese from 0.60 to 1.65 weight percent. Increasing the carbon content to approximately 0.5 weight percent with an accompanying increase in manganese allows medium-carbon steels to be used in the quenched and tempered condition.

High-carbon steels contain from 0.60 to 1.00 weight percent C with manganese contents ranging from 0.30 to 0.90 weight percent.

Carbon tool steel applications: (1) Cutting tools (2) Knives (3) Saw Blades / Band Saw Blades (4) Wood Saw Blades (5) Elastic Parts (6) Coil Springs (7) Pharmaceutical Knives (8) Textile Needles (9) Stationery (10) Chains (11) Clutch Cover and Parts (12) Agricultural Machines (13) Horticulture Tools

Mar temperingCarbon Steel: Steel designation JIS S60C S65C S70C S75C S85C SAE 1060 1065 1070 1075 1080 1085 1090 1095Low-Alloy Tool Steel: Steel designation JIS SK2 SK3 SK4 SK5 SK6 SK7

Austempering:Carbon steel or low-alloy tool steelSteel designation carbon 0.50% ~ 0.80% steel, etc. JIS S55C ~S 75C SAE 1055-1081

price mild steel plate A36 SS400 Q235B S235JR S355JR

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.