spray booth/GL2
Semi-Down Draft: Air enter booth cabin through top front filtered plenum, and exhausted from the rear centered exhaust plenum.
GL2 CONFIGURATION | ||||
Name | specification | optional | ||
1.Body | ||||
Panel | Sandwhich style,δ=50mm.polystyrene | rock wool | ||
Basement | Steel structure,3 rows vein board and 2 rows of grids | full grides | ||
Ramp | 2 pcs of vein board | |||
emergency door | 1 pcs emergency door with pressure lock | |||
Front door | 3pcs of front door whitout aluminum side cover | |||
2. Air system | ||||
frame | steel,powder coated | |||
Intake fan | 7.5kw | |||
Exhaust fan | No | |||
Intake duct | No | |||
Exhaust duct | 4m straight duct,one 90 bend,and one 60bend | |||
Chimney duct | 4m straight chimney and 2 small bends | |||
Spray/baking Transition damper | automatically air controled | |||
burner | RIELLO/G20 | BAIRUI | ||
heat exchanger | stainless steel,circular heating,chimney at back | |||
3.Filtration system | ||||
Roof filter | 4pcs of filter,mounted above support frame,which is made of steeland powder coated | |||
Floor filter | 2 pcs | |||
Air mouth filter | 1 pcs M style intake fan | |||
4.Light system | ||||
Upper light | 10set.4*40w per set | |||
Side light | No | |||
5.Electric sysytem | ||||
Control panel | components made in china ,overload,overheat,phase-lacking protection,motor direct start | |||
Power | 9.5kw | |||
6.Environmental system | ||||
Environmental filter | No |
spray booth/GL2