Welcome to ECBAY
split pressurized solar water heater
split pressurized solar water heater

Split pressurized solar water heater Heat collector Storage tank Working station kit Have own factory of vacuum tube

split pressurized solar water heater

Working principle: 1) When the temperature of the heat collector reaches the set value, the controller will make shall the circulation pump work automatically. 2) The circulation pump makes heat-conducting liquid circulate automatically. 3) The heat-conducting liquid transfers heat to water by the heat exchanger in the tank. 4) In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically. 5) In case the temperature of the tank does not reach Tm ax, then start the auxiliary heating device.

Feature: Collector separates with storage tank. The tank can be put in any place of house. And the collector can be put on the inclined roof or flat place. Module design, arbitrary combination, harmony with the building perfectly; Intelligent control and automatic operation; Anti-freeze: No water inside the tubes when it works. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature. Multifunction: Bathing, washing, domestic heating etc; Work at anytime and enjoyable. 

Structure: Model No: 100L 150L 200L 300L

Part of this system

vacuum tube with copper pipeworking station

water tank


Our factory of vacuum tube

split pressurized solar water heater

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.