Solar Water Heater 1.Good Quality 2.Reasonable Price 3.Nice Design 4.High Efficiency
Solar Water Heatert Working Principle
1. When the temperature of heat collector reaches the set value, the controller will make the circulation pump work automatically.
2. The circulation pump makes heat-conducting liquid circulate automatically.
3. The heat-conducting liquid transfers heat to water by the heat exchanger in the tank.
4. In case the temperature of the circulation pump does not reach the set value, the circulation pump will be shut automatically.
5. In case the temperature of the tank does not reach maximum temperature, then start the auxiliary heating device.
Solar Water Heater Features
1. The pipeline is made of red copper and conducted by heat transfer medium liquid; water can not flow in the vacuum tubes and is operated when confined; the crust uses aluminum alloy mould material of high strength with airflow design
2. Temperature preservation is equipped with standard electric water heater setting, automatic temperature control exchanger, and increased anode magnesium bars sticking to prevent furring
3. The insulating layer uses polurethane bulk bubble and has a good effect of temperature preservation
4. The product successfully carries out the installation of separation according to fabricating yard and is harmoniously blended with architecture
5. The equipments of separated solar water heater is composed by heat collector, storage tank, electric control device, hot water mix unit and fitting for circulation and installation
Solar Water Heater Working Station Component1. Operating screen 2. Manometer 3. Pump speed adjust switches 4. Temperature difference circulation pump 5. Flow rate indicator 6. Return circuit connector 7. Safety valve 8. Expansion vessel connector9. Return circuit connector 10. Wall mounting 11. Expansion vessel: 5L, 8L, 12L, 19L, 20L, 24L 12. Pressure resistance: 10 bar pressure for expansion vessel
Solar Water Heater Specification
Descripition | Split Pressurized Solar Water Heater |
Material of outer tank | 0.31-0.4mm thickness color steel/ fluorine carbon steel |
Material of inner tank | 1.2-2.0mm SUS304-2B Food Class Stainless Steel |
Tank insulating layer | 50mm polyurethane foam |
Inlet and outlet hole | Male G3/4 |
Max pressure | 6 bar |
Solar collector tube | High Borosilicate 3.3 Glass |
Thickness of glass tube | 1.6mm |
Vacuum tube tightness | P≤0.005 Pa |
Absorption | as=0.93-0.96(AM1.5) |
Emission ratio | 0.01~0.03(80°C±5°C) |
Idle sunning property parameters | Y= 260 ~ 300m²°C/KW |
Average heat loss coefficient | Ult=0.4~0.6W/( m².°C) |
Bracket: | 1.5mm thickness aluminum alloy/Galvanized Steel |
Welding: | Argon arc welding |
Fastening pieces: | Made of stainless steel screw |
Tank capacity | 100L-360L |
Solar collector | 1pcs 58x1800mm vacuum tube solar collector |
Absorber area | 1.875 m² |
Working station | SP106,SP116,SR962 working station |
Heat exchanger length | 18m |
heat pipe solar water heater
