1:h2s gas detector 2:Imported sensor 3:4~20mA 4:Built-in imported DIP switch 5:ISO9001:2008
H2S gas detector for industrial and commercial
Our this h2s gas detector (gas detector )can detect all kinds of toxic gas.When gas concentration reach calibrated valve, this analyzer may send out signal to gas monitoring system.And gas monitor may do some protective action according to program.
Feature:1.Adopts imported sensor with high measurement accuracy, high stability, strong anti-poisoning and anti-interference ability.
2.Automatic recognition and protection the concentration of sensors , short-circuit and open-circuit of sensors, and automatic fault detection .
3. Built-in imported Dial Switches, you will get what you want when you dial, this can avoid the confusion of physical and logical address caused by Electronic digit block string number.
4. Explosion-proof design, it is suitable for II gas environment
5. Adopts HBUS four buses communication mode ,power wire and signal wire both use non-polarity design.And with automatic protection function to avoid damaging controller caused by short -circuits in the use.
6. Intelligent sensor, replace sensor without demarcating.
7.Pipe-mounted and wall-mounted optional.
Technical:| Model No. | XP2000L | Power consumption | ≤1.5W(DC24V) |
| Detection principle | Catalytic / Electrochemical /Infrared/PID | Gas Sample mode | Natural diffusion |
| Communication mode | 4~20mA | Working voltage | DC14V~35V( detector terminal) |
| Install screw thread | G 3/4" internal thread | Dimension | 70mm×96mm×170mm |
| Explosion-proof sign | ExdIICT6 | Protection class | IP65 |
| Detection Gas | Combustible gas, VOC (Certain Organic Vapors), H2(ppm), CO,H2S,O2(VOL),NH3 ppm),Cl2,NO,SO2 | Working condition | temperature:-40°C~+70°C(Catalytic); -20°C~+50°C(Electrochemical),-20°C~+55°C(PID),-40°C~+70°C(Infrared) humidity:10%~93%RH(incondensable); pressure range:86~106kPa |
Fixed h2s gas detector with high measurement accuracy and stability
