Shenzhen Chaoyi Industry Development Co., Ltd. [China]

CY-858-9 CO Detector 1.Voltage:DC9V 2.Alarm density:150PPM 3.Static current:35uA 4.Alarm LpA:85dB

CY-858-9 CO  Detector

Technical Parameter

IntroductionThank you for purchasing the carbon monoxide alarm.CO gas is an odorless, tasteless and colorless gas that can kill.Do not relay on this Alarm to be final safety, if you suspect presence of CO immediately open windows and doors and vacate the property. Contact your local authority. Please takea few minutes to thoroughly read this user’s guide and save for future reference.Product viewFeatures/SpecificationFeatures:·Loud 85 Decibel alarm.·Permanent carbon monoxide sensor.·Powered by DC9V Battery.·The alarm sound pattern is three short alarm beeps. The red LED will flash while in alarm mode.·One ‘chirp’ every 30 seconds about is an indication that the battery is low(need replacement)(green LED still flashes once every 30 seconds about).·Test button to test the unit electronics and verifies proper unit operation.·Alarm memory feature: If the unit ever alarms, you can find out by keeping the test button pressed, green LED will flashes three times every second continuously if let the buttonis un-pressed, the sound and led will stop alarm.·Green and red LED lights that indicate normal operation and alarm status.·The unit will sound ‘chirp’ and red LED flashes once as power up.·.In 90 secs. After the batteries installed, the unit start to detect CO.Green LED: The green LED flashes every 30 seconds to indicate the unit is operating properly.Red LED: When a dangerous level of carbon monoxide is detected the red LED will flashes and the alarm pattern will sound.The CARBON MONOXIDE (CO) alarm monitors the air for the presence of CO. The alarm will sound and be accompanied by the flashing red LED light when there are highlevels of CO present.CAUTION: This alarm will only indicate the presence of monoxide at the sensor. Carbon monoxide gas may present at other area.Specification:Power Supply: DC9V batteries.Sensitivity & Time: 30ppm, alarms not activate within 120minutes50ppm, alarms within 60~90 minutes100ppm, alarms within 10~40 minutes300ppm, alarms within 3 minutesStandby Current: <50uA; Alarm Current: <50mA Operation Ambient Condition: 5~400C, 20~90%R.H.

CY-858-9 CO Detector