For house,office,restaurant and dormitory.PIR control,long time available guard against theft product.
GTS-999-15 HIGH-TECH PIR ALARM INSTALLATION WAY:
1.open the product back cover and enclose 6 pcs AA 1.5V batteries.
2.hang up it on the room ceiling or on the wall
3.use the AC adaptor(Optional) should be 9V,500MA,3.5mm plug
Specification:
1.Test running on the sense district:
2.Fit on the batteries or the adaptor(optional),fix the product in the sense district.Do the test running according to the instruction an adjust the sense angle.
Notice:
1.Do not fix in the place irradiated directely by sun indoor or outdoor.
2.Do not close to your ears because of the loud alarm
3.Please let this product far from the heat energy place.
4.If there are distort report,please adjust the sense angle.
5.Avoid vibration strongly.
6.Please care the distortion bring by the outside hot air current in the summer.
Use instruction:
1.Set alarm:
Press the arm/disarm button in the remote control.You should hear long sharp alarm and the red indicator flashes.After it stops flash,this product enters into the guard against theft state.
2..Alarm
When you set it in the alarm state,if there is an ambulant substance with animal heat in the sense rang,the product will alarm"DiDi"voice and LED flash.After the alarm,this product will stay in the alarm state still.
3.Release from alarm:
When you want to release the alarm state,please press the ARM/DISARM button.There will be two instances.
1.You will hear"DIDI"voice,and the led indicator flash twice which means nobody and nothing have entered into the sense district yet.
2.You will hear"DIDI"voice,and the led indicator flash twice:then sharp alarm voice will be 5 times,which means and ambulant substance has been to the sense district.
4.Emergency call:
press the"Panic"on the remote control,it will alarm at once with the LED indicator flashes.
5.When start up,the product need about one minute for warm-up
(GTS-999-15) HIGH-TECH PIR ALARM
