Manual Molding Silicon(e) Rubber
hoong ye jie [China] 
High quality Manual mold silicone rubber applications
Manual mold silicone rubber is mainly applicable to manual mold design, PVC plastic molds, cement product molds, melting point alloy molds, alloy toy craftworks, plastic toy craftworks, gifts and stationery, large statues, duplication of cultural relics, shoe sole mold fabrication, pad printing positioning, shock resistance for electronic equipments, etc.
Manual mold silicone rubber features description
The manual mold silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers.
Manual mold silicone rubber operations
Firstly process and prepare the model mold or the product to be duplicated, take certain amount of the silicon rubber, add 2% to 3% solid curing agent, and mix evenly and they are ready for use. One pair of mold can be solidified and formed in 2 to 3 hours.
Frequently asked questions for Manual mold silicone rubber
What should we do when the air bubbles appeared in the process of mold making ?
To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair . If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%-2%. In this way, the pre- crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.
For get further information about our silicone product, PLS contact with Mr.wenson.
Skype: wensona
TEL: 086-755- 89212382
FAX: 086-755-89948030
Email:[email protected]
Welcome to visit www (dot)szrl (dot)net.anytime.
