Precise cold rubber LSR mould, which can make the LSR product producing with higher-quality, higher efficiency, longer life
Precise cold rubber LSR mould, which can make the LSR product producing with higher-quality, higher efficiency, longer life, save more production cost.Full range of permanent magnet synchronous high response servo motors, quick response time of hydraulic. The flow of power’s output is as same as the flow of executive, no high-pressure throttling losses.
Self-research full stainless steel pumping unit and ration pump ,which can guarantee high accurate proportion of 1:1 ( A:B) to feed the material.
MWK series computer control system, multiple parameters adjustable
* Supersensitive displacement electronic ruler monitors the operation of every key action.
* Direct pressure mould clamping, it can be divided into 4 sections of mould clamping and 5 sections of mould opening.
* It can remember 60 sets of moulds parameter.
Horizontal LSR injection molding machine: the direct pressure mould clamping and injection can supply higher efficiency and better quality for producing the liquid silicone rubber products, usually is used for producing the liquid silicone products which has not any insert, such as the baby nipple and keypad and so on.
Technical Parameter:
Horizontal type | MWK-W5050 | MWK-W4545 | MWK-W4040 | MWK-W3535 | |
injection unit | shot volume | 350g | 350g | 120g | 120g |
injection rate | 30g/s | 30g/s | 30g/s | 30g/s | |
injection pressure | 19.6T | 19.6T | 19.6T | 19.6T | |
clamping unit | clamping force | 150T | 130T | 120T | 95T |
opening stroke | 150-550mm | 150-550mm | 100-500mm | 100-500mm | |
tie-bars space | 500*500mm | 450*450mm | 400*400mm | 350*350mm | |
ejection force | 7.8T | 7.8T | 7.8T | 7.8T | |
ejection stroke | 150mm | 150mm | 150mm | 150mm | |
other | pump pressure | 21Mpa | 21Mpa | 21Mpa | 21Mpa |
motor power | 7.5kw | 7.5kw | 7.5kw | 7.5kw | |
heater power | 9kw | 9kw | 9kw | 9kw | |
mould orientation ring diameter | φ100mm | φ100mm | φ100mm | φ100mm | |
machine weight | 2.4T | 2.2T | 2.1T | 2.0T | |
machine dimension | 3.5*0.95*1.75m | 3.5*0.9*1.70m | 3.5*0.85*1.63m | 3.5*0.79*1.58m |
Horizontal LSR(Liquid Silicon Rubber) Injection Machine