ISO9001:2008 Quality control system Meet and Exceed standards of ASTMC 1240 Capacity:3600Tons/Month
contact:lindafan2012(at)163.com
1. Instruction
Microsilica , also called silica fume or micro silica, is a byproduct of producing silicon metal or ferrosilicon alloys. Silicon metal and alloys are produced in electric furnaces. The raw materials are quartz, coal, and woodchips. The smoke that results from furnace operation is collected and sold as silica fume, rather than being land filled. Silica fume consists primarily of amorphous (non-crystalline) silicon dioxide (SiO2), its average granule diameter is 0.15~0.20 µm,specific surface area is 15000~20000 m2/kg, and it has extremely strong surface active. Microsilica can be used in a variety of cementation products, such as concrete, grouts, and mortars as well as elastomeric, polymer, refractory, ceramic and rubber applications. HS No.: 28112200 China Origin, microsilica meets the requirements of ASTM C-1240. Microsilica CAS #: 69012-64-22. Main function
Very low permeability to chloride and water intrusion. Extremely high electrical resistivity (20 to 100 times greater than ordinary concrete). Increased abrasion resistance on decks, floors, highways and marine structures. Superior resistance to chemical attack from chlorides, acids, nitrates and sulfates.3.JH92
Microsilica JH93 is a dry powder available in two forms,densified silica fume and undensified silica fume.
Microsilica JH93 is a pozzolanic materials that consisits primarily of fine silicon dioxide particles in a non-crystalline form.
Microsilica JH93 meets the requirements of ASTM C-1240 and contains a minimum of 93% silicon dioxide(SiO2).
Microsilica JH93:we have three factories in Shanxi,Yunnan and Qinghai Province,China.Stable quality and reasonable price.
HS No.: 28112200 China Origin, microsilica meets the requirements of ASTM C-1240.
Microsilica CAS No.: 69012-64-2
Microsilica Packing: 900kg/jumbo bags and 300-500kg/jumbo bags, and 20kg small plastic woven bags.
Microsilica fume 92% is used in cement.concret.ceramics and mortars etc.
Mandatory chemical and physical requirements | Standard Value |
Silicon Dioxide(SiO2) | min. 92.0% |
Iron Oxide (Fe2O3) | max. 0.3% |
Aluminium Oxide(Al2O3) | max. 0.7% |
Calcium Oxide (CaO) | max. 0.5% |
Magnesium Oxide (MgO) | max. 0.5% |
Sodium Oxide (Na2O) | max. 0.8% |
Loss on Ignition (LOI) | max. 1.0% |
Moisture Content % | max. 1.0% |
Percent Retained On 45μm | max. 1.0% |
Pozz. Activity Index - 7days accelerated curing | min. 130% |
Bulk Density | 450-600kg/m3 |
4. Luoyang Jihe Micro-Silica Fume company
We are willing to take a sincere attitude and cooperation with you.
(1) Quality
We have our own test lab in factory and supply stable and reliable microsilica to our customers.
(2) Price
We have 3 microsilica factories in Shanxi, Qinghai and Yunnan, our price is low and reasonable.
(3) Convenient
We have warehouse in Luoyang and have transportation partner. Delivery is fast and easy.
(4) Service
Our sales groups are positive attitude, and 24 hours feedback service to ensure the service is good.
micro silica in ceramics and mortars 92%