Shower Room Glass 

Tempered glass is a type of glass with even compressive stress on the surface which is made by heating float glass to nearly softening point and then cooling it down rapidly by air. During the instant cooling process, the exterior of glass is solidified due to rapid cooling while the interior of glass is cooled down relatively slowly. This process will bring the glass surface compressive stress and the interior tensile stress which can improve the mechanical strength of glass by germination and result in good thermal stability.

Advantage

1. The anti-impacting performance and anti-bending performance are 3-5 times higher than ordinary glass.2. It breaks into granules in case of strongly knocked, so no hurt would be caused. 3. Deflection angle of tempered glass is 3-4 times larger than that of float glass of the same thickness. When there is load on tempered glass, its maximum tensile stress does not located on the glass surface as float glass, but on the central point of glass sheet.

 Application

Tempered glass is safety glass, extensively applied in the places which has critical request of high mechanical strength and safety, such as glass door, curtain wall of building, indoor partition, elevator, showcase, door and window of building, furniture and household appliance etc.

 Specification

Max size: 2440*800mm

Mini size: 150*300mm

Quality

With super and stable performance. It has exceeded the GB/ T9963-1998 <Coated glass>

National standard and the GB/17841-1999<Tempered glass and heat-processed glass for wall>National standard

Category

clear tempered glass, tinted tempered glass, color glazed tempered glass, reflective tempered glass Low-E tempered glass, insulating tempered glass and laminated tempered glass etc.