conductive plastic potentiometer 100 million cycles service life Linearity 0.1%-0.02% Smooth low noise output Repeatability  conductive plastic potentiometer for linear position sensors The advantages and manufacturer of Conductive Plastic     Comparing to the metals, plastics have many advantages which mainly include easy-manufacturing, corrosion-resistance and under-weight. The DAP powder will be pressed into the groove of insulating matrix through the thermoplastic technique,and then the solid body of holistic DAP is conductive plastic.   Features of conductive plastic board  A.   Super service life  ( 100 million cycles)B.   Trimming line for linearity compensationC.   Linearity  0.1%-0.02%(according to stroke)D.   Repeatability ≤0.01mmE.   Operating speed ≤10m/sF.   Stroke lengths from 50mm to 2500mmG.   Smooth and low noise analog signal outputH.   Temperature coefficient 5ppm/k I .   Operating temperature from -60 to 150°C Technical specification of CONDUCTIVE PLASTIC BOARD  

Technical specification of CONDUCTIVE PLASTIC BOARD

Resistence

KΩ

5

10

Resistence tolerance

±%

20

linearity

%

0.1-0.05

0.05-0.02

Repeatability

mm

0.01

Max voltage

V

42

Resolution

infinite

Output smoothness

%

0.1

Insulation resistance

MΩ

≥10

Temperature Coefficient

ppm/k

5

Operating temperature

-60······150

Service life

cycle

100*106

Operating speed

m/s

≤10

                      Our professional service         As the reasons of errors, such as asymmetric thickness and width, the linearity of conductive plastic which was printed into PCB is not good enough. MINOR has the trimming track technology for implementing extremely high linearity. Numerical controlled cutting machine will trim the plastic track accurately, and the conductive plastic can be trimmed to the  required linearity !  What MINOR could privde you is not only required linearlity, but also any resistance such as 5678Ω or 8765Ω just as you need .

conductive plastic potentiometer for linear position sensor