Detailed Product Description
PC Board Mountable
Millivolt Output
Integral Temperature Compensation
FEATURES
Adhesive Mount
±0.5% Non-linearity (typical)
±1.0% Temperature Performance
(Typical)
DC Response
Gas Damping
Built-in Overrange Stops
Low Power
DESCRIPTION
The Model 3052 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with an epoxy sealed ceramic cover and
is designed for adhesive mounting. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams
change their resistance as the motion of the suspended mass changes the strain in the eams.
Silicon caps on the top and bottom of the device are added to provide overrange stops.
This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. For an accelerometer with a mounting bracket which can be used to bolt the sensor to the mounting location see the Model 3058.
±2 ±20
±5 ±50
±10 ±100
