portable scanner TSN410,skypix handyscanner 900dpi Sensor: A4 color contact image sensor 600/300 dpi scan selection

SUPER STAR SKYPIX portable handy 3d/a4/a5 scanner 420

Key features

Max scanning size---LTR / A4

Color / Monochrome (Mono) scan selection

600/300 dpi scan selection

Direct save JPG file to MicroSD card

Support MicroSD card up to 32GB

Driver free to download for Windows 7 / Vista / XP and Mac OS10.4 or above (direct plug-in, driver installation not required)

Function parts

Key specifications of ST-420:

Image sensor	A4 Color Contact Image Sensor
Number of sensor	5136 dots(1st~5104 dots available)
Resolution	Low resolution : 300x300 dpi(default) High resolution: 600x600 dpi
Maximum scanning speed for A4 size document	Color High resolution: 6.0 Seconds Mono High resolution: 6.0 Seconds Color Low resolution: 6.0 Seconds Mono Low resolution: 6.0 Seconds
Capacity (Based on 1GB microSD card. Scan A4 size file, the quantity of scans varies depending on the content complexity)	600dpi color: 220 Photos(Min.)
	600dpi mono: 290 Photos(Min.)
	300dpi color: 780 Photos(Min.)
	300dpi mono: 1280 Photos(Min.)
Scan width	8.27"
Scan length	300/600/900 DPI: 25"(Max)
File format	JPEG
LCD	Scanning status display
Auto Power Off	3 Minutes
USB Port	USB 2.0 high speed
External memory	Micro SD Card
Standard Battery	4XAA alkaline batteries

How to calibrate the scanner

Note: Perform calibration only when white balance needs adjustment

1. Place the scanner on the white paper area. Press and hold scan button to turn scanner on.

2. Press and hold JPG/PDF button then press scan button once to enter the auto-calibration mode. The SD card symbol will flash.

3. When the SD card symbol stops flashing, the green and red lights will turn on. Do not move the scanner during this process.

4. When the red light turns off, start scanning the white section of the paper until the green light turns off. (You may slide the scanner backwards if necessary.)

5. When the green light turns off, calibration is complete.

6. Press and hold scan button to turn off the scanner.

How to scan

Note: To scan, make sure your scanner is not connected to the computer. 

Turn on the scanner by pressing the [POWER/SCAN] button for 2 seconds.Hold the document firmly with one hand on a flat surface.Place the scanner on the edge of the paper approximately 5/8 to 3/4 of an inch onto the page to ensure the whole document can be scanner. Make sure to keep the scanning area in between the scanning width indicators marked on the side of the scanner.

SUPER STAR SKYPIX portable handy 3d/a4/a5 scanner 420