M42 bandsaw blade used of England CAPARO high alloy spring steel and France ERASTEEL M42 high speed steel wire.
Benxi Shuangying New Material Technology Co., Ltd. used of England CAPARO Company’s high alloy spring steel and France ERASTEEL M42 high-speed steel wire as raw materials. We imported the most advanced laser welding production lines and advanced metal strip processing technology from ROFIN Company in Germany, to produce a great variety of steel strips, as well as bi-metal band saw blades.
| CHARACTERISTICS | ADVANTAGES | APPILCATION | ||||||
| Edge material:M42/M51 Backing material:high alloy spring steelLaser weldingTeeth hardness HRC67-69 | High wear resistanceHigh red hardnessTeeth are unbreakableLong service lifeHigh cutting ability and efficiency | High/medium/low carbon steelAlloy steel/ stainless steel The section of various shapes | ||||||
| T=Hook tooth(positive tooth) | ||||||||
| (T)=Strong tooth(with trapezoid shape) | ||||||||
| H=Strong tooth(with turtle-back shape) | ||||||||
| B=Bi-angle tooth(resistance tooth) | ||||||||
| Teeth per inch | Dimensions: width*thickness (mm) | |||||||
| Tooth Form | 13*0.6 | 19*0.9 | 27*0.9 | 34*1.1 | 41*1.3 | 54*1.6 | 67*1.6 | 80*1.6 |
| 0.75T | Δ | |||||||
| 1.25T | Δ | Δ | Δ | |||||
| 2T | Δ | Δ | Δ | Δ | ||||
| 3T | Δ | Δ | ||||||
| 4T | Δ | Δ | ||||||
| 6T | Δ | |||||||
| 8T | Δ | Δ | ||||||
| 14T | Δ | Δ | ||||||
| 0.75/1.25T | Δ | Δ | ||||||
| 0.9/1.3T | Δ | Δ | ||||||
| 1/1.25T | Δ | Δ | Δ | |||||
| 1.4/2T | Δ | Δ | ||||||
| 2/3T | Δ | Δ | Δ | Δ | Δ | |||
| 3/4T | Δ | Δ | Δ | Δ | Δ | Δ | ||
| 4/6T | Δ | Δ | Δ | Δ | Δ | Δ | ||
| 5/8T | Δ | Δ | ||||||
| 6/10T | Δ | Δ | ||||||
| 8/12T | Δ | Δ | Δ | |||||
| 10/14T | Δ | Δ | Δ | |||||
| 3/4(T) | Δ | Δ | Δ | Δ | Δ | |||
| 4/6(T) | Δ | Δ | Δ | Δ | Δ | |||
| 2/3H | Δ | Δ | Δ | |||||
| 3/4H | Δ | Δ | Δ | |||||
| 4/6H | Δ | Δ | ||||||
| 3/4B | Δ | |||||||
T=Hook tooth(positive tooth): The hook tooth with a positive rake angle can be used for all types of steel, especially for long-chip and hard-to-cut materials, for example construction steel and hardened steel, as well as high alloy materials.
(T)=Strong tooth(with trapezoid shape): It suitable for cutting many kinds of composite hardness and high plastic materials as well as pipes,thin-plates and special shaped cross sections.
H=Strong tooth(with turtle-back shape) :The strong tooth with turtle back is suitable for cutting solid and thick wall pipe materials, as well as all kinds of high alloy content and viscous materials.
B=Bi-angle tooth(resistance tooth) :Bi-angle tooth enhance the hardness of the tooth, and the intensity of the tooth is better than the normal tooth. It is suitable for cutting solid material, thick-wall pipe and all higher alloy content material.
N=Normal tooth(standard tooth 0 angle) : The normal tooth is best suited for the sawing of materials with high carbon content, such as tool steel or cast iron with short chips. It is suitable for a wide range of applications, including thin crosscuts and materials with thin-walled cross sections.
M42 bandsaw blade
