Sand Washer Features: 1, Simple structure 2, Big capacity 3,suitable for different work conditions 4, convenien
Sand Washer Working Principle:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.
Advantages and characteristics:
Reasonable structure, large capacity, low consumption, little loss of the sand during the washing process, low failure rate.
Technical Parameters:
Model
| Helix diametermm | Length of tubmm | Selected size(mm) | Capacity (th) | Speed of helix (rmin) | Motor power (kw) | Water consuption(th) | Weight (t) | Overall DimensionsLxWxH(mm) |
LSX915 | 915 | 7585 | ≤10 | 100 | 21 | 11 | 10-80 | 3.48 | 8500×2950×1930 |
2LSX915 | 915 | 7585 | ≤10 | 200 | 21 | 2×11 | 20-160 | 5.2 | 8420×3765×2030 |
LSX1115 | 1115 | 9782 | ≤10 | 175 | 17 | 15 | 20-150 | 10.18 | 10970×3945×4720 |
2LSX1115 | 1115 | 9782 | ≤10 | 350 | 17 | 2×15 | 40-300 | 17.49 | 10970×5250×4720 |
XSD2610 | 2600 | 3220 | ≤10 | 50 | 0.8 | 5.5 | 4-4.5 | 2.7 | 3220×2125×2670 |
XSD3016 | 3000 | 3810 | ≤10 | 80 | 0.8 | 7.5 | 16.30 | 3.2 | 3400×2615×2800 |
Note: This specification is just for reference, any changes are subject to the products
www.stonecrusherschina.com
www.chinacrushers.com
XSD2610 Sand Washer Yellow