Safety belt to EN358:2000 and EN354:2010. With rope lanyard and scaffold hook and plastic buckle for adjust D rings position.
Safety belt (waist belt) TE5209 is designed to enable the wearer to perform his work without undue discomfort and remain secure against the hazard of a fall from a height. Essential fastening and adjustment elements shall remain accessible to the wearer and operate effectively when manipulated by hand.
NOTICE:1)Fasten the safety Belt around the waist so that it may not slip off from your body if a drop should occur.2)Pass the belt through the buckle rightly, and pla3e the "D" ring just on the side of the body.3)Set the life line to a support, which is strong enough for a shock, upper than your waist as much as possible in order to confine the dropping distance to the minimum4)Do not use the life line on the beam or angle with sharp edges. And where it is exposed to sparks or spatters.
KEEPING:1)Keep the Safety Belt exposed to the fresh air in the shade.2)Keep the Safety Belt on a pole or a wall not on the ground directly.3)Be careful a life line not kink.4)Do not keep the safety Belt in a room with chemicals ( acids: alkaline substances.Organic solverks, etc)
CONSTRUCTION & REQUIREMENT:
USE OF WAIST BELT:
SIMILAR MODELS:
PRODUCTION:
Safety Belt to EN358 EN354
