Welcome to ECBAY
LL-B1525*2(63.5'') B Type Double-mould tire shaping and curing press
LL-B1525*2(63.5'') B Type Double-mould tire shaping and curing press

Type Double-mould tire shaping and curing press 1.ISO 9001:2008/CE/SGS 2.without oil spiliing 3it makes rubber heat resistant

    Type Double-mould tire shaping and curing press

1.Uses

    This vulcanizing machine is used for all kinds of vulcanizing mould,rubber and plastic

2.Structure

    host including driving system and curing room ,center, push the top institutions and fixture ,frame tire unloader groove,tire unloader bar etc.

3.Feature

 (1.) the capsule to neutral is better ,the stability is good .it oyercome  type A vulcanizing press the defects of low position precision and is more suitable for the radial tire sulfide.

 (2.) replacing time capsule than type Avulcanizing press capsule tube replaced time is short

 (3.) capsule for half A flip,its folding than type A vulcanizing press less ,the capsule long service life

 (4.)to save energy .at the same time greatly reduce the leak ,reduce maintenance quantity and more conducive to the protection of the environment.

Parameter of TBR tyre one stage building machine

Parameters\VersionLL-B1525*2(63.5'')LL-B1310*2(55'')LL-B1145*2(45'')
Steam dome specification 1525mm1310mm1145mm
Max mould closing force4220KN2890KN1720KN
Height of mould254-635mm245-445mm230-455mm
Power of main motor16KW13KW11K
Apply bead specification19''-24''16''-20''12''-17.5''

LL-B1525*2(63.5'') B Type Double-mould tire shaping and curing press

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.