recycling machine 1.high oil put 2.Q245R&Q345R 3.energy saving 4.no pollution
Fully Automatic Waste Plastic Recycling Machine in India
The main part of the device:
(1)reactor: Using Q345 boiler steel and the thickness is 16mm.
(2)oil reacting tank:The first step for preciptating.
(3)depositing tank:The second step for preciptating so that the oil gas will be refined.
(4)oil tank:It's used to store the crude oil
(5)cooing pipe:The oil gas will be cooled down and become liquid oil finaly.
(6)gas seperate:The impurities will deposit at the bottom of the gas seperate.
(7)impact deduster collector:The first step to clear the impurities.
(8)water film cyclone:The second step to clear the impurities.
(9)chimney:The smoke without pollutants will release into the air from the chimney.
The technology reference :
| model | material | structure | daily capacity | working pressure | host speed | cooling method | host size | host volume | host weight | production cycle |
| ZL-5000 | Q245R | horizontal rotation | 5t | normal | 0.4Rev/min | water-cooled | 5000mm*2200 | 19cube | 5.6t | 20days |
| ZL-6000 | Q245R | horizontal rotation | 8t | normal | 0.4Rev/min | water-cooled | 6000mm*2200 | 23cube | 6.5t | 20days |
| ZL-6600 | Q245R | horizontal rotation | 10t | normal | 0.4Rev/min | water-cooled | 6600*2200 | 25cube | 7.5t | 20days |
The electric power:
| model | speed reducer | water pump | oil pump | draft fan | three blowers | total power |
| ZL-5000 | 3KW | 1.5KW | 1.5KW | 4KW | 750W | 10.75KW |
| ZL-6000 | 3KW | 1.5KW | 1.5KW | 4KW | 750W | 10.75KW |
| ZL-6600 | 3KW | 1.5KW | 1.5KW | 4KW | 750W | 10.75KW |
The whole batch time:
| model | feeding time | processing time | cooling time | discharging time | total time |
| ZL-5000 | 2hours | 6-7hours | 2hours | 2hours | 13hours |
| ZL-6000 | 2hours | 7-8hours | 2hours | 2hours | 14hours |
| ZL-6600 | 2hours | 8-9hours | 2hours | 2hours | 15hours |
All the data is for reference
The advantages of our machine:
(1)The material of products use Q345R which garantee the quality and the thicknees is 16mm so that it can extend its service life.
(2)The energy saving is an obvious feature of our device.After two hours' burning you don't have to add any fuel,because the waste gas from the burning will be used to be the new fuel and then you will save your fuels.
(3)Eenvironmental protection is another advantage of our machine.Our machines have two steps to remove dust.The first dust removal equipment is impact deduster collector and the second step to remove dust is to use the water film cyclone.Through this two times dust removal,the clean gas finaly release into the air.
(4)Safety is the most important.In order to ensure the safe operaion ,our device set up safe equipments,such as
alarm, safety valves, thermometer, pressure gauge and safety valve.
The ueage of the final products:
1.crude oil:It's can be used into many industries as follow:
(1)power factory
(2) Chemical factory
(3) Aluminum factory
(4) Boiler factory
(5) central heating factory
2.carbon black:
(1) power factory
(2) Pigment factory
(3) Rubber factory
3.steel wire:It's can be sold to the steel wire and to be reused.
The percentage of all kinds of final products:
1.crude oil:45%
2.carbon black:30%-35%
3.steel wire:15%
Fully Automatic Waste Plastic Recycling Machine in India
