Gear 1.Largest gears can be measured 2.precise making process 3. High quality 4.over 10 year experience Gearspecifications

1.Largest gears can be manufactured and measured 2.Diameter 4000mm, module 40, precision class DIN3 3.Weight 20 Tons

Gear

Our company has the ability to forge, quench and temper, process, surfuce quench and carbonize high precision soft/ hard-surfaced gear or gear shaft. The main specification is within Φ3500mm, Mn≤40mm. Our company can produce 4000 tons of gears and gears shafs annually, and can produce different products according to our custumers’ requirements.  

The main technical parameters of gear

Standard of materials: GB/T3077-1999The grade of materials: 45, 20Cr, 40Cr , 35Cr Mo , 42Cr Mo, 20CrMnMo, 20CrMnTi, 17CrNiMo6, 20CrNi2MoStandard of pruduction: ISO1328-1995Smelting method: electric arc furnace + refining furnacePrecision accuracy: according to GB/T10095-88 standard, within five degradeHardness: 56-60 HRC is the hardest; 40-55 HRC is the average hardness; below 28 HRC is the softDetection methods and the implementation of standards

Samples are from the same furnace

Tensile test is done according to GB/T288-2002 standard

Hardness test is done according to GB/T231 standard

Standard of ultrasonic flaw detection

All forging pieces must go through the GB/T6402-1999 standard ultrasonic flaw detection, grade two. If the forging pieces are within 1000 kgs, they can reach the GB/T6402-1999 standard, grade one.

   2.   Manetic particle testing

Every product must be tested after the surface quenching and machining.

Method: magnetic particle testing

Satisfying products: no crack, scab, white dot or fold. Repair welding is not allowed.

Gear