Welcome to ECBAY
High quality PTC MZ6 for CTV ELECTRIC DEVICE
High quality PTC MZ6 for CTV ELECTRIC DEVICE

MZ6 ptc ceramic thermistor temperature sensor 1.80--180degc 2. stall in motor winding 3.thermal response

1.range from TK30C to TK180C 2. 5C a interval between the controlled-temperature 3. small size,high sensitivity,long life

                  

 

Specifications

1.Provid the best productions 2.The lowest price and the best quality 3.Fast delivery 4.Long llife and high sensitivity

Summary The product which carried out German DIN44081,DIN44082 standard, featured with high sensitivity and long life, the insulation strength is AC6KV , it can be used for explosion-proof motor for protection places which over-temperature, and it also can be single or many series match with motor protector using , The temperature-measuring terminal of the sensor shall be installed in where it supposed to be, lead-out wire shall be connected to signal input terminal of the motor protector, as soon as the temperature is approaching temperature rating of insulation, input resistance figure will reach action-valve value of the protector, so the protector will simultaneously cut off the power and the protection shall be realized.Technical data the controlled temperatures range from Tk 60°Cto Tk 180 ,there is 5 °Cinterval between the controlled  temperature Tk according to our specification ,we also can produce one chips to six chips

 

 

Installation instruction : The sensor is fixed with the parts which needed to temperature measuring (usually install in the windings),when you fix the sensor ,don’t beat it or squeeze it and also don’t give much tension to lead out wire ,lead out wire connect to motor terminal box , and must be used match with the motor protector ,then it can control motor which over  temperature Every chip of Sensor of three chips install in three -phase winding separately ,each phase install one chip Installation ,connecting wire ,problems and repairing ,pls refer MZ6 series of PTC temperature controlled sensor

PTC thermistor applied in various types of electronic energy saving lamp and fluorescent electronic ballasts

PTC thermistor could extend the service life of the fluorescent tube by more than 10 times.Switching current can pass over 100,000 times: the resistance will not floatThe withstanding voltage can reach to over 800  1,000V ACHigh reliability, good performance of safety and stability

                                                             Specifications

Type Number

Dimensionmm

Curie TemperatureTc

ResistanceΩ

Power Consumption W

Over Voltage WithstandingVAC

MZ3

3×3

50-125

300-8K

0.08

800

MZ4

4×3

300-8K

0.09

800

MZ5

5×3

100-3K

0.12

800

MZ6

6×3

80-3K

0.18

800

MZ8

8×3

50-2K

0.38

800

MZ11

11×3

30-1K

0.48

1000

Application field of PTC Motor Protection Sensors / Thermistors         

     

High quality PTC MZ6 for CTV ELECTRIC DEVICE

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.