Detailed Product Description
SWS - 2 Series Power resistors
As per DIN VDE 0123:1985 the SWS-2 resistor does not need any further maintenance if the resistor gets used according to the specified technical data.For safety reasons a regular visual
inspection and check of ohmic value is suggested at least every 2 years, better once a year.
Because of using stainless steel material,a long life expectancy is also part of the advantages for this resistor version.The very easy handling of the SWS -2 will be another advantage for applications where service is requested!
Specifications:
- Ohmic value:
< 0.5 Ohm - others on request
- Tolerance:
+/- 10 % for standard,
also +/-5% available
- Cont. power load:125 Watts without additional cooling
- Max. peak current:Depending on ohmic value!
For example:
3,500 Amps/100ms for a 100mΩ resistor (it is suggested to perform an ohmic and visual
check after such high current pulses!)
- Max. peak voltage:350V for 100ms
- Max. weight:< 1100g
- Max. mounting torque: 100Nm
