Green Plastic cabinet High system gain>60dB, High system output power>20dBm
The Wide Band booster is a bi-directional amplifier used to enhance signals between a mobile and a base station.
It features with customized frequency band, flexible installation, cost-effectiveness and ideal coverage solution, its output power varies from 10dBm to 20dBm.
It is applied to small, medium-size areas such as home, offices, shops, and basements, remote countryside , car, ship and mining well etc.
System Diagram
The RF link (donor) towards the base station is typically fed from an outdoor antenna while the coverage area is fed by an indoor antenna
The RF link (donor) towards the base station is typically fed from an outdoor antenna while the coverage area is fed by an indoor antenna or connected to mobile antenna directly.
The signal from the base station is received via directly antenna, then forwarded through a duplex filter, is amplified in a low noise amplifier (LNA), enters the RF filter for wideband selective, and then amplified in the power amplifier.
The output signal passes a duplex filter, before it is fed to mobile or indoor antenna which retransmits the signal to the aim areas.
Product Features
Green Plastic cabinetHigh system gain>60dB, High system output power>20dBmLight weight, small dimensions, easy to installLinear power amplification to effectively suppress inter-modulation and spurious emissionSimple installation with external AC/DC adapterDual ports and full duplex design
Technical Specifications
Items | Specification | |
Uplink | Downlink | |
Network | GSM900/DCS1800/CDMA800/ CDMA1900/WCDMA/iDEN/TERTA | |
Frequency Range | (Customized) | (Customized) |
Gain | 55±2/60±2dB | 60±2/65±2dB |
Output Power | 20±2dBm | 20±2dBm |
Gain Adjustment Range | No Support | |
Gain Adjust precision | No Support | |
ALC Scope | ≥ 20dB | |
In-Band Ripple | ≤ 3 dB | |
Out-of-Band Suppression | ±1MHz > 40dB, ±5MHz > 50dB, | |
I/O Impedance | 50 Ω | |
VSWR | ≤1.5 | |
Load VSWR Tolerance | 20:1 | |
Noise Figure | ≤ 5dB | |
Inter-modulation Attenuation | 45dBc | |
Spurious Emission | ≤-36dBm(9KHz~1GHz)/≤-30dBm(1~12.75GHz) | |
System Delay | ≤ 5μs | |
Max Input Power Level(1minute) | -10dBm | |
RF Connector | N-Type (Female) | |
Temperature Range | Operation: -25°C ~ + 55°C;Storage: -30°C ~ +60°C | |
Relative humidity | 5~95% RH | |
Power consumption | 200W | |
Power Supply | AC220V | |
Power Supply socket | BP3 Type(Customized) | |
Dimensions | 132×91×31mm(without connector) | |
Weight | 0.5kg | |
Shipment Dimensions | 600mm×500mm×300mm | |
Shipment Weight | 25kg | |
Cabinet Color | Green | |
Installation | Wall-mounted | |
RG45 Interface | No Support | |
Monitor/Setting Parameter | No Support | |
Wide Band Booster -20dBm
