Welcome to ECBAY
GSM 900MHz Fiber Optic Repeater
GSM 900MHz Fiber Optic Repeater

GSM900MHz Fiber Optic Repeater signal is relayed via fiber optic cable

The Fiber Optic Repeater (FOR) is designed to solve problems of weak mobile signal in such place: far away from the BTS (Base Transceiver Station) and has fiber optic cable network underground.

The whole FOR system consists of two parts: Donor Unit and Remote Unit. They transparently convey and amplify the wireless signal between the BTS (Base Transceiver Station) and mobiles via fiber optic cables.

The Donor unit captures the BTS signal via a direct coupler closed to the BTS (or via open air RF transmission through the Donor Antenna), then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cables. The Remote Unit will reconvert the optic signal into RF signal and provide the signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

As per the method of receiving BTS signal by the Donor Unit, two types of FOR are available:

Cable-Access FOR: to receive BTS signal via a direct coupler closed to the BTS (recommended); Wireless-Access FOR: to receive BTS signal via a Donor Antenna (applicable when no fiber optic cable connecting to the BTS); can be sorted into 2 sub-categories: Band-Selective and Channel-Selective.

See the overview of Repeater

Application Diagram of Cable-Access FOR

Application Diagram of Wireless-Access FOR

FeaturesAluminum-alloy casing has high resistance to dust, water and corroding; Omni-directional coverage antenna can be adopted to expand more coverage; Adopting WDM (Wavelength Division Multiplexing) module to realize long-distance transmission; Stable and improved signal transmission quality; One Donor Unit can support up to 8 Remote Units to maximize utilization of fiber optic cable; RS-232 ports provide links to a notebook for local supervision and to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater’s working status and download operational parameters to the repeater. Application

To expand signal coverage or fill signal blind area where signal is weak or unavailable.

Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways… Indoor: Hotels, exhibition centers, basements, shopping malls, offices, parking lots, …

The FOR is mainly applicable to such case:

Underground fiber optic cable network already exists beneath the area to be covered; There is huge obstructive terrain between the BTS and the area to be covered; The distance between the BTS and the area to be covered is 20 km around.

In comparison with RFR (RF repeater) and FSR (frequency shift repeater), the FOR has the following benefits and disadvantages:

ProCon
No more self-oscillation and easy to choose installation location; For Cable-Access type, pure BTS signal picked up by the Donor Unit will greatly reduce the signal noise; The Remote Unit can be installed out of the BTS coverage; A full 360-degree coverage can be realized; No need to occupy frequency resource as the link frequency. The total cost of equipment is higher; A fiber optical connection between the Donor Unit and Remote Unit is required.
SpecificationsDonor UnitRemote Unit
 
Working Frequency (customizable)Uplink890~915MHz
Downlink935~960MHz
Transmission Distance≤ 20km
Max. Input Level+10dBm--
Output Power (customizable)0 dBm27~43 dBm (0.5~20 W)
Gain≥ 65dB
Gain Adjustment Range1~31dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR)< 1.5
Noise Figure< 5dB (only for uplink)
In-Band Ripple≤ 3dB p-p
Spurious Emission≤ -36dBm
In-Band Intermodulation Attenuation≤ -40dBc/30kHz
System Delay≤ 5.0μSec
I/O Impedance50Ω
Fiber Optic Light SourceLaser unit (wavelength: 1310nm / 1550nm)
Optical Output Power≥0dBm (1310nm) / ≥3dBm (1550nm)
Optical Receiver Sensitivity≤ -25dBm
RF ConnectorN-Type (Female)
Temperature RangeOperation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range≤ 95% (non condensing)
Power Supply (customizable)DC +24V / DC -48V / AC 220V±15%, 50Hz / AC 110V±15%, 50Hz
Backup Power Supply (optional)4 hours
Casing LevelCable-Access: --Wireless-Access: IP65Output power @27~30dBm: IP31Output power @33~43dBm: IP65
DimensionsCable-Access: 418mm X 90mm X 290mmWireless-Access: 630mm X 400mm X 230mmOutput power @27~30dBm: 385mm X 300mm X 130mmOutput power @33~37dBm: 570mm X 325mm X 215mmOutput power @37~43dBm: 630mm X 400mm X 230mm
WeightCable-Access: 6kgWireless-Access: 35kgOutput power @27~30dBm: 8kgOutput power @33~37dBm: 27kgOutput power @37~43dBm: 35kg
Remote Monitoring/Control via NMSSupported
ALC (Automatic level control)Supported
 Fiber Optic RepeaterMODEL: RPT864 (GSM 900MHz) / RPT884 (GSM 1800MHz) / RPT894 (GSM 1900MHz)RPT914 (CDMA 450MHz) / RPT934 (CDMA 800MHz) / RPT994 (CDMA 1900MHz)

GSM 900MHz Fiber Optic Repeater

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.