NWD Z-wave smart home z-wave remote controller

Features:

The  NZ-ZCE01 (Figure 1) is a portable Z-Wave remote controller with multi-channel support; also it is a Z-Wave Enabled Security Controller. It can control the secured door locks when it is in the security network. Also, it can be configured as a primary or secondary controller within a Z-Wave home automation network. It works with almost every ZWave enabled devices, binary switches, dimmers, thermostats, secured door locks, binary or multi-level sensors. Users can control their ZWave enabled devices individually or through “Scene” control. Scene is a collection of Z-Wave devices configured to a user-preferred settings, levels, modes or operating conditions. The NZ-ZCE01 also equipped with a backlit LCD screen and an intelligent Self Navigated Button (SNB) system. Users can setup and operate their Z-Wave devices through the LCD and the SNB system using their NZ-ZCE01 , and enjoy a networked, wireless home automation system anywhere at home.

Device or Node

Devices and nodes are all terms to describe an individual ZWave device. These are all interchangeable when setting up your ZWave network.

Inclusion

Add a Z-Wave device to the network.

Exclusion

Delete a Z-Wave device from the network.

Remove

To take a device out of a group, scene or association group while that device still exists in the same Z-Wave network.

Z-Wave Network

A collection of Z-Wave devices controlled by primary and secondary controllers operating on the same system. A Z-Wave network has its own unique ID code so that controllers not in the network cannot control the system.

Primary Controller

The first controller used to set up your devices and network. Only the Primary Controller can be used to include or delete modules from a network. It is recommended that you mark the primary controller for each network for ease in modifying your network.  

Secondary Controller

A controller containing network information about other modules within the network and is used for controlling devices. Secondary controller is created from the Primary Controller and cannot include or delete modules to the network.

Inclusion Controller

A controller containing network information about other modules within the network and is used for controlling devices. Inclusion controller is created from the Primary Controller in a SIS enabled Z-Wave network. Inclusion Controller has the ability to add and remove devices from the network.

Scene

A collection of Z-Wave devices configured to turn to a specific level, setting, mode, or perform an operation. Scenes are usually activated by a controller, timed event, or specific conditions.

Specifications: Model:NZ- NZ-ZCE01 Signal (Frequency): 868.42 MHz, Before using the NZ-ZCE01 , please install the batteries: • 4xAAA batteries are required for operation. • Remove the battery cover on the back of your remote. • Check the polarity of the batteries and the "+/-" marks inside the battery compartment. • Insert the batteries. • Push the battery cover back in place.  

NWD Z-wave smart home z-wave remote controllerEU