Welcome to ECBAY
Thermoelectric Cooler Peltier New C1205 telluride semiconductor cooling piece 40 * 40mm DC12V FOR HOT SALE high-quality
Thermoelectric Cooler Peltier New C1205 telluride semiconductor cooling piece 40 * 40mm DC12V FOR HOT SALE high-quality

Thermoelectric Cooler Peltier New C1205 telluride semiconductor cooling piece 40 * 40mm DC12V FOR HOT SALE high-quality

Chip Model: C1205Power supply range: Rated Voltage DC12V Voltage 15VMaximum current: 5A (choice of ≥ 5A Switching Power Supply)Maximum Power: 60W (please good heat dissipation)Internal Resistance: 2.4 ~ 2.8Ω (ambient temperature 23 ± 1 ° C, 1kHZ of Ac test)Maximum temperature difference: ≥ 75 ° C (single-layer is the highest)Dimensions: 40 * 40 * 3.8mmAssembly pressure: 85N/cm2External leads: 150mm (large amount may be set)Working environment: temperature range -55 °C to 83 °C (too high ambient temperature will directly affect the cooling efficiency)Packaging technology: around the standard 704 silicone rubber sealPackaging standards: foam boxes for packaging, storage conditions of ambient temperature -10 °C to 40 °CStorage conditions: -40 to 60 ° C

As can be seen from photograph:The fastest from the 1202-1210 cooling speed is 1210Other, although a little slower, but eventually the minimumLike a few people race ultimately can reach the finish line, but early or latePower of large anti-load capacity, such as C1202 and 1206 surface plus the same size conduction cooled blockC1206 above guide cold block temperature must be low, because the load capacityOf course, the power supply also requires heat to be sure to do a good job cooling otherwise the purchase of small and medium-sized power(Recommended middle of C1206)Small C features (C1202 1203 1204)1: current, low power consumption only 2A-24W particularly suitable for outdoor or battery long-term use2: low heat, low heat dissipation requirements, common heat sink and fan can3: the temperature difference between the cooling speed is not high-power fast but 30 seconds after reaching the final temperature differenceC Features (C1205 C1206 C1207)1: current moderate, mainstream products can be the perfect alternative to all TEC1-12704-TEC1-12708 chip, the cooling efficiency 30%2: suitable for a small refrigerator, small air conditioners, chillers, and Static and Dynamic3: a large temperature difference, and quickly reach the lowest temperature, long life heating and cooling efficiency, high recommended C1206C Features (C1208 C1209 C1210)1: Current and power consumption depending on the model must be selected more than 100W power supply2: cooling speed, and instantly reach the maximum temperature difference for the occasion of the cooling speed3: large amount of heat and cooling requirements high, the recommended water-cooled or large aluminum copper, if the heat up less than please do not buy high-power

Chip Model: C1212Power supply range: Rated Voltage DC12V Voltage 15VMaximum current: 12A (please choose ≥ 12A switching power supply)Maximum Power: 144W (good heat dissipation)Internal Resistance: 1.2 ~ 1.5Ω (ambient temperature 23 ± 1 ° C, 1kHZ of Ac test)Maximum temperature difference: ≥ 75 ° C (single-layer is the highest)Dimensions: 40 * 40 * 3.5mmAssembly pressure: 85N/cm2External leads: 150mm (large amount may be set)Working environment: temperature range -55 °C to 83 °C (too high ambient temperature will directly affect the cooling efficiency)Packaging technology: around the standard 704 silicone rubber sealPackaging standards: foam boxes for packaging, storage conditions of ambient temperature -10 °C to 40 °C

Thermoelectric Cooler Peltier New C1205 telluride semiconductor cooling piece 40 * 40mm DC12V FOR HOT SALE high-quality

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.