concentrating tank To prevent the condensed liquid pipe tank corner, the products used in stainless steel spherical Hancock

concentrating tank

1.ZN-C type is separated from paragraph long cylinder; 2. To overcome the top of the second condensed steam can not be condensed into the condenser before returning to the shortcomings of the tank. The equipment will be replaced by oblique horizontal condenser; 3. In order to enhance the productive capacity of equipment, the equipment can be concentrated area heating jacket, condenser, cooler area increased in varying degrees; 4. To prevent the condensed liquid pipe tank corner, the products used in stainless steel spherical Hancock; 5. In the lower concentration can set up a quick open-hand hole in order to clean up the tank residue, residue; 6.ZN-C-type heating jacket is two or three hours, when the low-level segment at the time of heating will be shut to prevent the dry wall. Cone at the end of its easy to read at the end of the net emission concentrated liquid.

Item	ZN-C-200	ZN-C-300	ZN-C-500	ZN-C-700	ZN-C-1000
Evaporation cylinder body dissolved L	250	400	670	800	1220
Liquid cylinder volumeL	150	240	350	500	760
Heating area m2	1	1.4	2	2.3	3
Condensation area m2	2.5	4	5	7	8
Equipment weight kg	630	950	1350	1700	2200
Equipment high mm	2600	2650	3100	3270	3550
Equipment covering mm	1900×620	2140×850	2300×950	2500×1000	2750×1150

concentrating tank