Fin press line Machine Line includes: Coil Cradle, Oil tank... .Fin press line Main charactors & function: 1. Machine Line includes: Coil Cradle, Oil tank, Air feeder High-speed Precision Power press, Sucker & Collector, Air system, Electric system, Hydraulic system2. The slide of power press has hydro-lifting function which will be convenient for dies installation/commissioning3. Power Press speed & Vacuum Stucker is controlled by converter warning , no oil warning.4. Collector has protecting system for fault operation, no material warning , no oil warning.5. Power press has hydraulic overload system6. Hydraulic rapid-dies changing device7. PLC control & displayer 

	Unit	17001	17002	17003		17004	17005
		Open type	Close type			Two point
		JL21-45B	YKC-18		YKC-24	YKC-36	YKC-48
Nominal:	KN	450	450		630	800	1000
Slidestrokes:	mm	40	40		40	40	40
Stroke per minute:		100-180	150-250		150-250	150-250	150-250
Die height:	mm	200-27	280-330		280-330	280-330	280-330
Slide lifting height:	mm	--	80		80	100	140
Table size:	mm	750×750×80	1100×780×100		1300×900×100	1350×1200×130	1400×1500×140
Bottom size of slide:	mm	500×300	670×720		920/720×820	900×11700	900×1470
Width of material:	mm	300	400		550	800	1050
Sucking length:	mm	800,1000	800,1000		800,1000	1000	1000
Collecting height:	mm	600	720		720	720	720
Coil ID×OD	mm	φ85×φ850	φ150×φ1000		φ150×φ1000	φ150×φ1000	φ150×φ1000
Main motor	KW	5.5	7.5		11	15	18
Weight:	kgs	6000	9000		12000	18000	22000
Overall size:	cm	650×250×265	750×300×320		750×350×350	950×450×350	1000×700×400

Chip-cleaning machine specially designed for elbowsThis machine is used to deal with kinds of small elbows at 9.52 to 7in heat echanger. It can remove burring of massive elbows and clean them and make them dry at one time.1. Feeder,which can convey the small elbows from storage happer to vibrating grinding machine. The time and frequency can be set.2. Cleaner, in which both elbows and grinding steel balls vibrate and they rub each other. In the meantime, cleaning agent at a certain dilution ratio is added continuously to wash the elbows and the wastewater is discharged. Thus the burring is removed.3. Dryer in which elbows automatically is aligned with openings downwards, so as to completely empty the grinding balls in the elbows and to dry tem up by electrical heat-blower. 

Main technical parameters
Power supply	Quantity of elbows for one clean	Clean speed	Dimensions(m)	Weight
10.5kw	1800 or so	100pcs minutes	3.82×1022×1.92	1500kg

Fin press line