Taiwan frequency motor. Italy OMPI dry clutch Japan TACO double solenoid valve Japan NSK bearing, oil seal, seals Japan PLC
APE Series Closed-door Type Double Crank Precision Steel Frame Press
The symmetrical front-tear column structure design minimizes deflection and is most suitable for precision progressive die applications.
No inherent angular deflection, which significantly extends die life and reduces cost of tooling maintenance.
High rigidity structure ensures consistent dynmic precision.
High torque, enclosed wet clutch brake unit reuies minimal maintenance, eliminates noise and pollution caused by air borne particles, and significantly extends lining life.
User friendly multifunctional control system.
Designed to allow simple integration with automated auxiliary equipments.
| APE-110 | |||
| Model | S | H | |
| Capacity | Ton | 110 | |
| Rated tonnage point | mm | 5 | 3 |
| Stroke | mm | 180 | 110 |
| Stroke per minute | s.p.m | 35-65 | 50-100 |
| Die height | mm | 400 | 435 |
| Slide adjustment | mm | 100 | |
| Slide area | mm | 1400*500*70 | |
| Bolster area | mm | 1550*650*130 | |
| Side openging | mm | ||
| Main motor | kw | 11*4 | |
| Slide adjust device | kw*p | ||
| Air pressure | kg/cm2 | 5.5 | |
| Presses precision | JB/T 6580-93(JIS 1Class) | ||
Standard Accessories
Inverter
Standard operating system of taiyida
Electronic crank angle led display
Electronic speed led display
Operation mode selection/off/inching/safety one stroke/continuous
Hydraulic overload protector
Portable 2-hand push
Dual solenoid valve
Motorized slide adjustment
Digital die height indicator(unit 0.1mm)
Silder and die balancing device
Total counter, 6digits
Preset counter, 6digits
Maintenance counter, 4digits
Life counter, 6 digits
Electronic rotary cam switch (6 spare channel)
Air ejector1/2" one channel
Air source receptacle 1/2" two channel
Missfeed detection circuit
Power receptacle(available only for single phase, 110V power source wiring by suer)
Optional Accessories
Die cushion
VS motor
Safety light curtain
Slide knock-out device
Main motor reversing circuit
Foot switch
Safety die block with plug
Dual solenoid valve with detector
Electric yellow pump
Missfeed detector
Flywheel brake
Anti-vibration amounts
Quick die change system
Upper die clamper
Lower die clamper
Die liffter
Die arm
Anchor bolts & foundation plates
Automatic feed equipment
NC straightener feed c/w uncoiler(3 in 1)
NC roller feeder
Staightener c/w uncoiler(2 in 1)
Staightene
Closed-door Type Double Crank Precision Press Machine(APE-110)
