Welcome to ECBAY
AUTO Series automatic booster system
AUTO Series automatic booster system

AUTO Series automatic booster system Pressure Tank : Steel Pump body: Cast Iron Coil wire: Copper

AUTO Series automatic booster system

AUTO series automatic booster systems consist of a water pump, an airtight pressure tank, a pressure gauge and a pressure switch. Most of water pump in this catalogue can be composed and become automatic booster system. The pressure tank with a non-toxic rubber membrane, or called pressure vessel, has been pre-filling with air pressure of about 0.12Mpa before leaving the factory. These system give suitable mains water pressure as required by modern domestic appliances and industrial applications, and will ensure enough water to supply all user outlet

Structural characteristics

Pressure Tank : Steel or Stainless steel Pump body: Cast IronCoil wire: CopperImpeller: Brass Diffusor:PPO/Cast Iron Bearing:C&U/NSK/SKF Insulation class: B and F Protection class: IP44 or IP54 Mechanical seal: Carbon-ceramic / Stainless steelShaft: 45# Steel / Stainless steel 420Single phase motor with Thermal protector

Technical date at 50 Hz

ModelPowerVoltage (V)Current (A)Max. Flow (l/min)Max. Head (m)P.Switch (kgf/cm2)Pipe Diameter (inch)Overal Dimension (cm)Weight (kg)Qty/20ft

Remarks:110V, 115V, 127V, 110/220V, 230V, 240V, 50Hz or 60Hz can according to the customer's requirements.    

AUTO Series automatic booster system

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.