Welcome to ECBAY
Wire slurry pump throat bushing 6/4AH
Wire slurry pump throat bushing 6/4AH

1.48kg 2.56-62HRC 3.27%-30% Cr content with excellent wear-resistance 4.lost foam casting ,good surface quality

Front plate liner insert is the marjor parts of the wet side , it works with the volute liner,back plate liner insert and the impeller to tranport the slurry . The working side of the front plate liner insert is easily worn out owing to the corrosive slurry hit the plat of the woring side in hight speed , particularly in the  surface of this place,if the surface is not smooth enouh , the friction is high and wear/corrosion speed will raise.

  The lost foam casting is a good solution for the surface problem , and a range of measures are taken to prevent the casting problem , after final heat treatment , the hardness of the parts can be 56-60HRC ,it will efficiently improve the lift of the parts !

Don't hesitate to contact us and get more details !

Wire slurry pump throat bushing 6/4AH

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.