Welcome to ECBAY
In-line Chemical Centrifugal Pump
In-line Chemical Centrifugal Pump

In-line Chemical Centrifugal Pump


Capacity: 1.8~1600 m3/h
Head: 5~150 m
Size: 20~300 mm
Speed:970~2900 r/min

Temperature: -20~120 degree

 

KCH.jpgISG Vertical Pipeline Centrifugal Pump.jpg

KCHW .jpgISW Horizontal Pipeline Centrifugal Pump.jpg

 

 

1. Summarize

The IHG series is single-stage, single suction and vertical centrifugal pumps. It is designed according to the international standard ISO2858 and manufactured according to the international standard JB/T6878.2-93. It is combined with our company for many years production experience and the design of the second generation of energy efficient products. It is the complement for IH and FB chemical pump. The series flux: 1.5∼1600m3/h Outlet pressure5∼125m. It is divided into basic type, distributor type and incision type. Based on the different medium and temperature, the flow part adopts the stainless steel, therefore it can already replace the importing stainless steel centrifugal pump everywhere.

 

2. Usage

KCH / IHG vertical pipeline chemical pumps, for delivery of non-solid particles, corrosive, liquid that the viscosity is similar to water, apply to the petroleum,chemical,metallurgical,power,papermaking,pharmaceutical and food sectors such as synthetic fiber, Use the temperature of 20~+120.

 

3. Characteristic

The pump is vertical configuration. The import and export has same diameter. It is in the same center line, with merits if compact appearance, low construction investment. It can be combined with shield for outdoor usage. An impeller directly installed on the motors extended shaft, short size of the axial, pump and reasonable configuration motor bearing, therefore it can effectively balance the pump operation generated by radial and axial load, thus ensuring a smooth running pump, low noise of vibration, without dismantling piping system, only discharge pump conjoined Block nut can extract all the rotor components. We can adopt pump string or parallel operation mode in accordance with the requirements of pipeline layout. Series flux: 1.5∼1600m3/h Outlet pressure5∼125m. It is divided into basic type, distributor type and incision type. The stainless steel material : 304,316,316L.

 

KCL.jpg

Company _.jpgProduction Flow .jpgEngineering Case_.jpgCE Certificates.jpginitpintu_3.jpgcontact method.jpg

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.