Flow rate :0-150m3 / h; Head :60-120m; Power :0.75-37kw; speed :500-960r / min; Diameter :20-135MM G-type single-screw transmission medium Viscosity of various liquids, particularly viscous difficult transmission medium. Various concentrations of liquid and dry materials through the separation of dehydration. Contain solid particles, fibers, liquid suspensions. Liquid, gas, solid mixture. Can not be stirred, cut and plunder the sensitivity of the liquid. Corrosive liquids. G-type single screw working characteristics Adapt to a wide range of all mobile media can be transported and even non-current materials. Flow, pressure stability, and no pulse. Variable speed to change the output flow can be used as measurement of dosage. Inhalation of ability, work noise, no leaks, no temperature rise. options on a single screw pump Correct selection is the key to get best results for different media to meet the physical and chemical properties of the operational requirements, we recommend: user data pump made by our selection of recommended professionals, and finally confirmed by the user. Selection key operating data required are: Transmission media name, corrosive, abrasive, viscosity, solids content, temperature; Range of operating parameters or traffic flow, maximum pressure, continuous or intermittent operation; Horizontal or vertical installation environment, fixed or mobile, the special requirements of connecting pipe, explosion-proof protection requirements.
G-type single screw pump characteristics G-type single screw as the structure and operating characteristics, and piston pumps centrifugal pumps, vane pumps, gear pumps, compared with the following number of advantages: 1, can transmit high solids medium; 2, steady flow of uniform pressure, low-speed more obvious; 3, is proportional to flow and pump speed, which has a good regulatory variables; 4, a pump can transport multi-media of different viscosities; 5, pump installation position can be tilted; 6, for conveying sensitive of centrifugal force and other sensitive items and damaged goods; 7, small size, light weight, low noise, simple structure, easy maintenance. G-type single screw pump selection Pump selection is based on the specifications of the nature of the liquid to be transported and flow, the pressure to decide, and the pump speed by the transport of liquid viscosity and corrosive, as the main parameters to choose in order to ensure reliable operation of the pump. Pump design speed of conveying water or water of similar non-corrosive liquids when the maximum speed allowed in the actual use of life due to the nature and requirements of different media, use should be generally lower than the design speed. Containing particles of high viscosity and medium, the general design speed or lower 1/2-1/3 some low speed of pump wear beneficial, but after use because of wear and tear flow down the stator, then may be appropriate to improve speed to compensate for the decline of a constant flow of policy. Technical parameters Flow rate :0-150m3 / h; Head :60-120m; Power :0.75-37kw; speed :500-960r / min; Diameter :20-135MM; temperature: -15-200 °C.
G Type Single Screw Pump
