Pneumatic Diaphragm Pump working pressure: 0.15-0.8 Mpa, Maximum transmission viscosity: 1000 centipoise
Pneumatic diaphragm pump
Technical parameters:
Working pressure: 0.15-0.8 Mpa
Maximum transmission viscosity: 1000 centipoise
Medium import and export connecting threads: G3 1/8"
The intake connecting thread: G1 1/4"
Outline dimension: 180 x 150 x 135
Fixed pitch: Ø 8 pitch of holes: 135 * 95
Operating features:
First, pneumatic, no spark, especially applicable to explosion-proof;
Second, medium flow can through the compressed air inlet valve to make infinitely adjustment;
Third, self-lubricating, low gas consumption, mobile install and use;
Fourth, medium outlet pulse-free, no impact exercise, feed fluid uniformity;
Fifth, the diaphragm uses corrosion resistant material, can transmit various corrosive medium.
Operating principle:
This pump has left and right two groups of diaphragms, aim to separate the left and right surgetank with the medium convey cavity. When the valve core of the reversing valve in the right place, compressed air into the left surgetank, meanwhile, the compressen air of the right surgetank will be outlet. Along with the increasing of left surgetank pressure, left diaphragm will extrusion towards left, to make increasing the pressure of the transmission cavity, the medium of the inner cavity through the single valve and convey upwards, then outlet by the exit, right transmission cavity single valve turn off.
Pneumatic Diaphragm Pump
