Welcome to ECBAY
Huaguang Positive and Negative Printing Plate
Huaguang Positive and Negative Printing Plate

+Quilk inking, run length +PS/ CTCP/CTP Plate +Aluminum presensitized negative working plates +Positive working plates

Huaguang Positive and Negative Printing Plate

 PS/CTCP/CTP Plate

 Huaguang YP-II ­Technical Specifications
Plate typeConventional positive plate
Substrate Electro-­chemically grained and anodized lithographic aluminum.
Gauge 0.15/ 0.30 (mm)
Maximum width1320 mm 
Spectral sensitivity350-­420 nm 
SafelightUV filtered or Yellow
Sensitivity 130- ­150mj/cm2
Color changeBlue­ Green to Green after exposed
Developer Huaguang PD developer (concentrated solution), 1 liter can process 15 sqm. Recommended dilution ratio:1:3( machine process), 1:4( manual process)
Dot reproduction2%­-98% in 200 lines/inch
Packaging 0.15mm 100 pieces/box
0.30mm 50pieces/box if length<1030mm;
30pieces/box if length≥1030mm;
25pieces/box if the area>1m2
Shelf life18 months when stored in a light­-free area away from excessive cold, heat and high humidity
Run lengthAbove100, 000 (Actual run length may vary according to press, ink and stock conditions.)
Huaguang UV-­P Technical Specifications
Plate TypePositive offset plate for UV­-CTP plate making
Application Medium for sheetfed/web offset press
SubstrateElectro-chemically grained and anodized aluminum
Gauge 0.15 mm/ 0.20/ 0.25/ 0.30/ 0.40 mm 
Maximum short grain width0.15/0.20 mm: 1050 mm
0.30/0.40 mm: 1320 mm
Spectral sensitivity350-­420 nm UV light
365-­375 nm& 405­-410 UV laser
SafelightUV filtered or Yellow
Platesetter compatibilityLuscher XPose! UV, Basysprint UV­-Setter, Cron UVP etc.
Sensitivity 50­-60mj/ cm2 
Color changeBlue­-Green to Pale Green after exposed
Development Conductivity: min. 55 ms, max. 70 ms
Temperature: 20­-25 °C PH 13.00-­13.40
Developer Common positive offset plate developer
Dot reproduction2%­-98% in 200 lines/inch
Final image colour Blue-­Green 
Shelf life18 months when stored in a light­-free area away from excessive cold, heat and high humidity
Run length0.30/0.40 mm above 100,000 (Actual run length may vary according to press, ink and stock conditions.)
Huaguang TP-P Technical Specifications
Plate TypePositive working, no preheat thermal digital plate, with optional   postbake for longer runs
ApplicationMedium for sheetfed, web offset press
SubstrateElectro-chemically grained and anodized aluminum 
Gauge0.15/0.30 mm 
Maximum short grain width1320 mm 
Spectral sensitivity800-­850nm
Platesetter compatibilityAll the main brands in market, like Kodak Trendsetter/Lotem/Magnus, Screen PT-R, Heidelberg Topsetter/Suprasetter etc. 
Laser energy required120 mJ/cm2- 160 mJ/cm2 ( varies based on platesetter manufacturer and developing condition )
Resolution1% to 99% @ 200lpi. Dependent upon capability of imaging device.
FM capability20 micron stochastic.
ProcessorsRecommended: Glunz&Jensen, Kodak Plate Processors
DeveloperHuaguang TPD-III, Kodak ­Goldstar Premium, IMAF Therm830/One Plus etc.
Processing23°C/30 seconds
Run length100,000 impressions unbaked, over 500,000 impressions baked. Actual run length may vary according to press/paper/ink conditions 
SafelightDaylight handling
Shelf life12 months, under recommended storage conditions
Transport and storageStore plates flat in their packaging, away from excessive cold, heat or high humidity. 
Recommended condition is: Temperature 10-­26°C & RH between 40­-70%.
Huaguang PPVS Technical Specifications
Plate TypeBlue negative working, violet photopolymer digital plate
ApplicationNewspaper printing
SubstrateElectro-chemically grained and anodized aluminum 
Gauge0.15mm, 0.30 mm
Maximum width1320 mm
Spectral sensitivity405 nm
Platesetter compatibilityAll the main bands in market, like Agfa/FFEI&FUJI/Krause/ ECRM/ Highwater/ Escher­-Grad/ Dotline
Sensitivity70­-80 uJ/cm2
Resolution3% to 97% @ 150 lpi under calibration
ProcessorsGlunz&Jensen interpolate/Raptor, Height inca/maya, Grafmac etc.
DeveloperHuaguang PPD, Fuji LP-DWS, Agfa PL­-10, IMAF NEGA 910, Varn PND etc.
ProcessingPreheat temp setting 93­-104°C ( plate surface temp.) 
For Huaguang PPD and Fuji LP­-DWS: Developer temperature 24-­26°C / Dwell time 16­-20 seconds. 
For Agfa PL­-10:Developer temperature 24°C / Dwell time 16-­17 seconds
Run lengthMore than 150,000 impressions
SafelightFor manual handling and platesetting loading, darkroom conditions with VG10 / FV50 / G10 safelight is required
Shelf life12 months, under recommended storage conditions
Transport and storageStore plates flat in their packaging, away from excessive cold, heat or high humidity.
Recommended condition: 20°C­--26°C, with RH between 40%-­60%.

Packing:

Transport:

Precautions:

Huaguang Positive and Negative Printing Plate

Ads by Google


About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.