Manual t-shirt heat transfer equipment 1.CE approved 2.One year warranty 3.Manufacturer 4Euroupe design,original design
manual t-shirt heat transfer equipment with CE 38*45cm
Manual t-shirt heat transfer equipment1.CE certification2.One year warranty3.Manufacturer4Euroupe design,original design
Guangzhou Brisense M&E Equipment Co.,Ltd. is the unique manufacturer of producing ROSA heat press machines.On the market,there are many factories imitate our products,but the quality cann't meet our requirement.You can have a trial order,then the fact will prove it.
Product Specification
| Model | Printing size(CM) | Power(KW) | Tempreture range (°c) | Time range(S) | Packing(CM) | Voltage(V) | G.W/N.W(KG) | Packing size(cm) |
| RS-3838 | 38*38 | 1.8 | 0-220 | 0-999 | carton and EPE foam | 110/220 | 26/24 | 82*46*48cm |
| RS-3845 | 38*45 | 1.8 | 0-220 | 0-999 | carton and EPE foam | 110/220 | 30/28 | 82*46*48cm |
| RS-4060 | 40*60 | 2.5 | 0-220 | 0-999 | carton and EPE foam | 110/220 | 37/35 | 82*66*48cm |
| RS-6080 | 60*80 | 5.0 | 0-200 | 0-999 | carton and EPE foam | 110/220 | 110/100 | 110*110*60cm |
| RS-6090 | 60*90 | 6.0 | 0-200 | 0-999 | carton and EPE foam | 110/220 | 116/110 | 120*110*60cm |
Product Feture
1.Unique structure,reasonable design,max opening degree is 70°,it is very easy to operate.
2.Use the digital display tempreture control system,the tempreture's error exactly is ±1°.
3.Pre-adjust the pressure,change th pressure freely.
4.Perfect air spring return,easy to use and safe.
5.CE certification,single-LED display integrated automatic electronic timing,it will automaticly warns after finishing the process.
6.Use the good heat aluminum plate,electronic tube and heat plate are casting as one makes the heat uniform and durable.
7.Telfon coated on the surface of heat aluminum plate,it is very convinient to clean.
8.With high tempreture elastic silicone pad to keep it not deform when it gets 400 degrees.
Specific Operating
1.Connect the plug with 220v,open the power switch,then its indicator lights(Attention:the whole machine must have the protecting land line)
2.Adjust the needed tempreture(actually 180-200°) and time(actually 40-45s)
Tempreture sets up:press the push botton of SET one time,it shows SP station,then press + or - to set the needed tempreture,finish the adjusting tempreture
Time sets up:press the push botton of SET the second time,it shows the SF station, then press + or - to set the needed tempreture,finish the adjusting time,then press SET push botton return to the warming interface.
3.Put the clothes on the silicone pad,then put the picture on the clothes,with the handle forced under pressure until it is completely closed;(the press is no more than 30kg,otherwise the handle will be deform)
4.When the time is up,the warning buzzers,then put the handle back into place;
5.If the transfer paper is the hot one,pls tear it up at once;
If the transfer paper is the cold one,pls tear it up after 10-15seconds.
Attention:
1.The whole machine must have the pretecting land line to keep safe;
2.The perfect transfer needs the right time,tempreture and press.Many factors will effect the transfer print,such as thickness of clothes,materials and the types of transfer paper.After transferring the trial,then can produce the large quatity.
Pictures Show:
Mainly products:
Heat press machine
Pneumatic heat press machine
Hydraulic heat press machine
Mug heat press machine
Cap heat press machine
Semi-atumatic heat press machine
manual t-shirt heat transfer equipment with CE 38*45cm
