Detailed Product Description
76mm receipt impact dot matrix printer
Technique Specification
1.Printing Mode: 9 pin parallel bidirectional printing with cutter or not;
2.Printing Density: 42CPL-210(Full dot)/420(half dot)
40CPL-200(Full dot)/400(half dot)
3.Printing Speed: 7.1 Line/sec at 16CPL
4.1 Line/sec at 40CPL
4 Line/sec at 42CPL
4.Printing Width: 42CPL-42(7×7)/35(5×7)
40CPL-40(7×7)/33(5×7)
5.Feeder Speeder: about 100mm/sec
6.Black mark inspection: Black mark printed at the right side of the receipt, the height is 5mm(along the feeder direction), the min width is 12mm;Part of the reflect rate of the black mark is not more than 10%, the reflect rate of the rest part is more than 75%.
7.Ribbon: ERC-39 ribbon with box: purple or black(EPSON or other compatible ribbon)
8.Reliability of the printing: 9 million line(MCBF), the ribbon which was appointed by the manufacturer is necessary.
Printing character
1.Support IBM character font II: 7×7dot or 5×7dot
2.International standard I, II class Chinese font: 24×24dot 3.00(width)×3.00(height)mm
Interface Form
1.Serial interface: D-SUB 25thread socket(female), compatible with RS-232; Support DTR/DSR; asynchronism serial communication:9600bps/19200bps; 8 digit data; 1digit stop
2.Parallel interface: 8 digit parallel interface; BUSY handshaking protocol, PE without paper detection, interface socket take D-SUB25 thread socket(pin)
3.Cashbox Control: DC24v, 2A, 6 Thread RJ-11 socket.
