1:OEM manufactures 2:Hirschmann connector 3:Low cost and quick delivery Detailed Product Description
Based on ceramic technology; 0~1bar..200bar 0.25%FS accuracy Hirschmann connector Low cost and quick delivery
GVA1 ceramic pressure transmitter is made integrated structure by using high quality thick-film ceramic sensors and special amplified circuits. The output of UPB3 is configured to 4~20mA current loop, or 0~5Vdc, or 0~10Vdc, or 1~5Vdc voltage signals. The pressure diaphragm of this transmitter is made from ceramic material, while its wetted parts is made from 316L stainless steel. Because of the thermal stability of ceramic and its thick-film resistance, the transmitter can be operated in a higher temperature range; at the same time, this also makes the zero & sensitivity thermal shifts over the whole operating temperature range of the transmitter is very small.
The compensated temperature range of GVA1 is 0~70°C, UPB3 is designed for use in most industrial application, and this product is suitable for measurement of most pressure medium (including corrosive medium) directly.
Features:
*Wide application scope and long service life*Automatic testing and laser trimming compensating zero & sensitivity*High accuracy & long-term stability*Good ability on anti-corrosion & anti-impact
Speifications:
| pressure medium | gas liquid compatible to ceramic stainless steel |
| pressure ranges | 0~1...200bar |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0~5V, 0~10V, 1~5V |
| accuracy | 0.25%FS, 0.5%FS (standard) |
| load resistance | RL = (U-12V)/0.02A (4~20mA current output) U-loop voltage (V) |
| long term stability | <0.2%FS/year |
| supply voltage | 12~36V |
| compensated temperature range | 0~70°c |
| operating temperature range | -30~+85°c |
| storage temperature range | -40~+100°c |
| temperature coefficient of zero | 0.3%FS/10°c |
| temperature coefficient of span | 0.3%FS/10°c |
| insulation resistance | 100MΩ@ 50VDC |
| process connection | G1/4 or others |
| electrical connection | DIN 43650 or others |
| material of wetted part | 1Cr18Ni9Ti |
| material of pressure membrane | ceramic |
| material of housing | 1Cr18Ni9Ti |
| sealing | n-Butyronitrile or fluoro-rubber sealing ring |
OEM zigbee sensor humidity outdoor
