1.The high voltage cutout fuse is made according IEC282-2. it is high breaking capacity.it is used widely in electric distribu
2012 NEW High quality High voltage cutout fuse
1) Requirement:
* Attitude: ≤1000-3000m
* Temperature: ≤40 degree
* Wind speed: ≤35m/s
* The place must be no burn, explode and shock
* Environment pollution: Grade IV
2) Technical Parameter:
* Rateds voltage(KV): 36KV
* Rated current(A): 100-200
* Rated switch-off current(KA): 6. 3-12. 5
* Minmun switch-off current(5A fusing filament)
* Impluse withstand voltage:positive:185KV, negative:200---phase-earth:185kv;across open gap:200kv
* minimum 50HZ withstand voltage: dry:95KV,wet:86kv; phase-earth:95kv across open gap:110kv
10KV-15KV
Type | Rated volt-ageKV | Rated cur-rentA | Brea-king currentA | Impuls voltageBILKV | Power freque-cy withs-tandvoltageKV | Cree-pagedist-ancemm | Weightkg) | Dimens-sions CM |
RTF-1 | 12 | 100 | 1,000 | 110 | 42 | 245 | 5.9 | 38.5×34.5×10.5 |
RTF-1 | 12 | 200 | 12,000 | 110 | 42 | 245 | 5.9 |
12KV-15KV
Type | Rated volt-ageKV | Rated cur-rentA | Brea-king currentA | Impuls voltageBILKV | Power freque-cy withs-tandvoltageKV | Cree-pagedist-ancemm | Weightkg) | Dimens-sions CM |
RTF-2 | 15 | 100 | 1,000 | 110 | 40 | 245 | 5.9 | 38.5×34.5×10.5 |
RTF-2 | 15 | 200 | 12,000 | 110 | 40 | 245 | 5.9 |
11KV-15KV
Type | Rated volt-ageKV | Rated cur-rentA | Brea-king currentA | Impuls voltageBILKV | Power freque-cy withs-tandvoltageKV | Cree-pagedist-ancemm | Weightkg) | Dimens-sions CM |
RTF-1 | 11 | 100 | 6,000 | 110 | 40 | 340 | 7.5 | 49×27×11 |
RTF-1 | 11 | 200 | 8,000 | 110 | 40 | 340 | 7.5 |
10KV-15KV
Type | Rated volt-ageKV | Rated cur-rentA | Brea-king currentA | Impuls voltageBILKV | Power freque-cy withs-tandvoltageKV | Cree-pagedist-ancemm | Weightkg) | Dimens-sions CM |
RTF-2 | 15 | 100 | 1,000 | 110 | 40 | 260 | 8.5 | 48.5×44×13.5 |
RTF-2 | 15 | 200 | 12,000 | 110 | 40 | 260 | 8.5 |
Ceramics High voltage cutout fuse