wind and solar hybrid water proof charging/discharging protection. LED,solar panel, renewable energy,
l Wind-Solar Controller Features
² SCM intelligent Control, precise control.
² Over-discharge protection double lower limit setting: two load path have different lower limit protection point, connecting base on load essentiality. (Single load path or street light mode do not apply this feature)
² Over-load indicates, over-load automatic disconnect, shortage lock up feature: indicate when over-load current over rate value, but do not disconnect; disconnect when serious over-loading. Recover from over-load, press reset button to recover power supply. If load has shortage, its load circuit will disconnect immediately, indicator light will be on, alarm can not be reset, disconnect battery to reset.
² Lightning-proof feature: lightning-proof feature on solar input terminal.
² Heat compensate feature, -5mV/°C each unit.(if with 12V battery, -30mV/°C each unit).
² Temperature sensor: auto-detect sensor damaged or disconnect and charge as when 25°C parameters.
² Protection when Solar panel incorrect connection, battery incorrect connection, over-charge, over-discharge, over-load, load shortage etc.
l Specification
Name | Wind-solar controller | Wind-solar street light controller | |
Working mode | Standard controller(K) | Street light controller(L) | |
Applicable batteries | Valve Regulated Lead-Acid Battery | ||
Controller working mode | PWM | ||
Applicable wind motor power | 400W (12m/S),600W(12m/S) | ||
System voltage | 12V/24V | ||
Applicable solar panel current | 10A | ||
Over charge protection voltage | 14.1-14.5V/28.2-29.0V | ||
Over discharge protection voltage (lower limit) | Single load (second route) lower limit: 10.8±0.3V/21.6±0.6V Dual load: First route lower limit: 11.3±0.3V /22.6±0.6V Second route lower limit: 10.8±0.3V/21.6±0.6V
| 10.8±0.3V /21.6±0.6 V | |
Over discharge recover voltage | 13.2-13.5V/26.4-27V | ||
DC load routes | Single/dual optional (confirm when order) | ||
Each route load maximum current | 10A | ||
Empty load consumption | ≤1% | ||
Charging loop voltage drop | ≤5% | ||
Temperature compensation | Optional feature -5 mv/ºC (single) (confirm when order) | ||
Installation structure | Wall hanging Al case, inside light pole | ||
Size | Maximum size: W180, H220, D80 Installation parameters: see later figures | ||
Working environment | -30°C- +50°C | ||
weight | Controller: 2Kg Dumper: 1.6Kg | ||
NOTE: 1. Must use dumper from the same package as controller! 2. When ordering, provide wind motor rate power and other its characteristic information. 3. Confirm installation bracket direction when ordering. | |||
Wind solar charging controller
